The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Fixed the turning to much to the left problem (https://67-72chevytrucks.com/vboard/showthread.php?t=633853)

Chevy Fleetside 06-26-2014 05:21 PM

Fixed the turning to much to the left problem
 
3 Attachment(s)
I fixed my turning to much to the left problem when using 73 to 87 front suspension. The first picture is the left tie rod and the 2nd is the right. I didn't have much room to adjust the left so It could toe the tire in more to the right and I only had so much room to adj the right side out. So I took the outer left tie rod end out and trimmed 1/2 inch off which allowed me to get more adj to the right and I turned the right side out as much as I could and that cured my problem. Had to throw in the picture of the truck up on the rack just because. :lol: I did all this with the pitman arm parallel with the frame.

PGSigns 06-27-2014 07:17 AM

Re: Fixed the turning to much to the left problem
 
Nice to see you got it worked out.
Jimmy

Chevy Fleetside 06-27-2014 09:54 AM

Re: Fixed the turning to much to the left problem
 
Thanks... I think the worst part is how easy it was. Took me a while to figure out what to do. :dohh:


All times are GMT -4. The time now is 08:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com