The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - 67 Mechanical oil gauge meets LS 5.3? (https://67-72chevytrucks.com/vboard/showthread.php?t=633871)

TwinsSpeedShop

06-26-2014 08:32 PM

67 Mechanical oil gauge meets LS 5.3?

Trying to keep my factory oil pressure gauge, so I bought the AutoMeter adapter and noticed that the 1/8 NPT threads on the adapter are larger than the factory threads on the line that screwed into the block of my I6. Has anyone ran into this and able to adapt?

ls1nova71

06-26-2014 08:44 PM

Re: 67 Mechanical oil gauge meets LS 5.3?

Sounds like you're missing the brass piece that originally threaded into the block. The small line threads into that. Its about 3/4" long.

TwinsSpeedShop

06-26-2014 09:05 PM

Re: 67 Mechanical oil gauge meets LS 5.3?

Quote:

Originally Posted by ls1nova71 (Post 6737536)

Sounds like you're missing the brass piece that originally threaded into the block. The small line threads into that. Its about 3/4" long.

That's very possible. I just unscrewed the line from the block when I pulled the motor. I'll look tomorrow when I get to the shop. Thanks

ERASER5

06-27-2014 10:05 AM

Re: 67 Mechanical oil gauge meets LS 5.3?

Easley huh? Once upon a time I lived across from the race track.

All times are GMT -4. The time now is 06:16 AM.