The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Disc Brake Upgrade (https://67-72chevytrucks.com/vboard/showthread.php?t=634495)

Chvyman1975

07-01-2014 10:20 PM

Disc Brake Upgrade

So I bought a disc brake kit yesterday from a guy that got it from Brothers. Today I got the passenger side on and decided to set the wheel on to see how it looked. Come to find out the center hub is too big for my 22" rims and it will not even go on. I got the conversion kit so I didn't have to use the 2" spacers anymore. I thought the wheels were supposed to mount flush on the rotors? My question is... Are there rotors that have a smaller and shorter center hub that can be used with the spindles? TIA

PGSigns

07-02-2014 01:02 PM

Re: Disc Brake Upgrade

Well I assume that the rotors are 73 to 87. I don't know if there is a smaller center rotor. Do you know what the wheels you got were supposed to fit?
Jimmy

Chvyman1975

07-02-2014 02:01 PM

Re: Disc Brake Upgrade

Its not so much the thickness of the hub on the rotor. Its more the dept in which its hitting the rim. Im going to see about the two piece setup with drilled and slotted rotors.

Chvyman1975

07-02-2014 09:44 PM

Re: Disc Brake Upgrade

Is t possible to have the center hub of the rotor machined down an inch?

PGSigns

07-03-2014 09:01 PM

Re: Disc Brake Upgrade

There is not an inch of material to remove.
Jimmy

All times are GMT -4. The time now is 05:38 AM.