Looking for deluxe steering wheel part
 

Looking for the small plate that holds the horn contact insulator. Its the part in the top left of this pic. The plastic insulator (bottom left) fits into it and then the horn ring goes over it.

Re: Looking for deluxe steering wheel part
 

is that piece available aftermarket? cuz if i have the original u can have it and i'll get aftermarket!

Re: Looking for deluxe steering wheel part
 

The contact insulator is, but I'm unsure on the retainer. I have found several places that sell parts for the deluxe wheels, but no retainers yet.

Re: Looking for deluxe steering wheel part
 

are you talking bout the white or red piece? this is my aftermart for my 65, but i have a deluxe wheel at my other house with simular parts for my 66 that are oem

Re: Looking for deluxe steering wheel part
 

ps i still want the other cover!!!

Re: Looking for deluxe steering wheel part
 

I need the silver piece in post #1 top left

Re: Looking for deluxe steering wheel part
 

ok, ill check. in my pic it using the black disk and its metal i think its the same but aftermarket if you want oem and if my black piece matches the other one i have u can have mine and i'll just buy another black aftermarket one...

Re: Looking for deluxe steering wheel part
 

the white round insulator in your pick is a part i need too if you have an extra. just let me know and we can work out something since we're parts swapping

Re: Looking for deluxe steering wheel part
 

dude you can have em free, also i been troll'n for 66 K10 hubcaps did u ever go on that pick last yr? if so any hubcaps for 17.5 nibs?

Re: Looking for deluxe steering wheel part
 

Yeah, no caps for 64-66. I found 2 61-63 caps for the 3/4 ton, driver condition.

Re: Looking for deluxe steering wheel part
 

got those parts, hey as long as my aftermarket ring is the same diameter you can have the whole setup, cool?

Re: Looking for deluxe steering wheel part
 

That works. Just let me know what you want and we'll subtract the difference from the seat cover.

Re: Looking for deluxe steering wheel part
 

the only difference is the oem piece is indexed to line up the plastic piece, so you can have the whole setup, im sure the aftermarket will work fine and im only "oem" anal on somethings... PM me ur shipping info and ur paypal stuff. ps what do i owe you?

Re: Looking for deluxe steering wheel part
 

PM sent

Re: Looking for deluxe steering wheel part
 

can you post the order the horn contact stuff goes and is there a spring cuz its been so long since i pulled it all apart...thks

Re: Looking for deluxe steering wheel part
 

For the deluxe wheel or standard?

For the deluxe if looking at the pic in post #13 from wheel to horn
steering wheel
install the spring contact for the horn into the wheel.
1.) the silver disk with the 3 holes
2.) the round plastic disc with the 3 holes punch out of the edge (insulator)
horn trim ring
3.) the black serrated metal disk
4.) the round plastic disk with the 3 holes the screws go through. This will screw everything to the wheel.
Then the washer and nut attach.
Then the horn cap will cover all of this up and mount w/2 screws from the back of the wheel. The cancel cam attaches to the bottom of the wheel.

Re: Looking for deluxe steering wheel part
 

Standard wheel doesn't use the insulator....its the cup style that the cap fits into.

Re: Looking for deluxe steering wheel part
 

i have the custom and deluxe style 2 of each wanted to have pairs for the 65C10 and 66 K10. i still need a horn ring for the custom type any leads?

Re: Looking for deluxe steering wheel part
 

hmmm....let me check. I know I have a nice center section, but I don't think I have an extra horn ring. They seem to pit worse than the caps due to being cast. I'll keep my eyes peeled though.

Re: Looking for deluxe steering wheel part
 

is your center section NOS? this is from my stash!!! just need the ring oh and a antenna BAD i dont want new and no one seems to have any old ones, what gives its just an antenna im not askin for a rubber floor mat!!!

Re: Looking for deluxe steering wheel part
 

No its not NOS, but is OEM. Is that one painted? I have seem some that were and some that weren't.

Heres a pic of my two wheels. I have the OEM green cap that came off the right wheel. Left wheel is 100% original. I have an all chrome cap on the left wheel. Let me see if I have better pics

Re: Looking for deluxe steering wheel part
 

Here you go Pimpston65. Like I said in the last post....the OEM green cap off the green wheel I have extra. I had a real nice OEM all chrome cap that I thought looked better.

Bad thing is I have a NOS standard cap still in the box and 2 standard wheels to get rid of now. I've already done the crack work and painted on wheel, so I may just hang onto it and the NOS cap.

And I think I have an old 63 antennae....might need some work. I know its different than the 65's, but would work until you found a correct one. I'll look tonight.

Re: Looking for deluxe steering wheel part
 

bought this off ebay today, guess i am anal bout parts... i dont need it,but if its for sale and i have an extra $20 which is rare im buyin...

Re: Looking for deluxe steering wheel part
 

yeah my cap is painted, kinda like medium blue with metallics kinda didnt look up the color code, but its not a repaint, u wanna let go of the original fawn boy??? maybe we can do so more trading!!! also i have a NOS 63 fusebox if u ever need one i cant use it cuz its not the same as 66 its missing a fuse spot on top, i guess i could use it but ima just keeping look for a crisp new one...

Re: Looking for deluxe steering wheel part
 

You mean the fawn center cap? Or the whole wheel? I'm going to repaint the wheel anyways....if you want to swap center caps and they are the same condition I'm ok with that. I can get a close up pic tonight for you of the fawn center cap.