wtb hatch parts
 

Just missed out on this one. I need one just like it. Could also use a handle assembly and the hatch latches that mount to roof

Attachment 1278491

Re: wtb hatch parts
 

I most likely have everything you need...let me check for you Thursday

Re: wtb hatch parts
 

Midunes I have the parts you need I can hold of shipping and get you some pictures. LMK

Re: wtb hatch parts
 

please do

Re: wtb hatch parts
 

I have a pretty big stash of extra hatch parts--let me take a look.

Re: wtb hatch parts
 

so to update I need 1 hatch mechanism, 1 hatch latch that mounts to the roof (found 1 at a local yard today). I have a handle assembly but need the shaft that goes from the handle to mechanism because I have to cut it out of my hatch.

Re: wtb hatch parts
 

Can't find one of those, I'll keep looking. Got plenty of other hatch parts though, if needing in the future.

Re: wtb hatch parts
 

thanks anyway

Re: wtb hatch parts
 

Help!!! I need 1 hatch latch catch,and 1 ferrule.

Re: wtb hatch parts
 

great start your own thread...or PM someone...don't steal my thunder:no:

Re: wtb hatch parts
 

sorry welcome to the site. i don't really care but you'll get your help faster if you start your own thread

Re: wtb hatch parts
 

Sorry! For High jacking,midunes .I thought I did start my own thread.i'm new at this,I will try again tomorrow.

Re: wtb hatch parts
 

no issue just kidding around good luck on your search

Re: wtb hatch parts
 

Handle chrome has some potting and can get picture if you like. The latch mechanism spring was broken and tight on the square shaft so I cut it off with a cut off wheel but got into the shaft on both sides please look at pictures. The end of the shaft also has some bad pitting but neither should affect the use of the handle. Handle 50 mechanism 50 and latch piece 15 so 115 for all 3 LMK.

Re: wtb hatch parts
 

so mechanism works well though

Re: wtb hatch parts
 

yep that mechanism works fine that one is from a different hatch

Re: wtb hatch parts
 

I'll take it all, box it with the rest please. Paypal coming. Could you included some hardware?

Re: wtb hatch parts
 

I do not have the correct hardware for the handle but should have the correct stuff for the mechanism. I do not know the correct length for the catch if you have a length I could send some of those also.

Re: wtb hatch parts
 

Paypal sent. Correct mechanism screws or bolts / nuts are what i really need. My hatch had none of it. Don't worry about the rest. Thanks again

Re: wtb hatch parts
 

midunes received payment will ship out today

king drake sent you a pm

Re: wtb hatch parts
 

got it all in today. now it time to disassemble and send out for correct finishes.

Re: wtb hatch parts
 

I got my parts yesterday,you the man! Thanks!

Re: wtb hatch parts
 

Looking for some good kick panel,for 61/2 speaker,without the vent cutout.Any advice?