Lokar Double Bend Radical 32" vs 23" in a 67
 

I was think of changing from my B&M Mega shifter to a Lokar double bend shifter. But I don't know if I should use the 32' or 23". I like the look of the 32" but want to make sure the travel from Park to Low gear (700R4) will clear my bench seat with center armrest. Should I use cable or linkage? I would assume I would have to mount the shifter as far forward as possible for full travel. Any pics or info would help.

Darren

Re: Lokar Double Bend Radical 32" vs 23" in a 67
 

there is at least one truck on this site running around with the 32 linkage shifter and it clears the bench in their truck. i think i found it by searching for lokar shifters a while back.
i have a extremely tall rat fink style homemade shifter in my truck with a 700r4 and it has plenty of room before it would hit the bench

Re: Lokar Double Bend Radical 32" vs 23" in a 67
 

i recommend the linkage, works great i installed a shorter style than you want in my wife's 67 and love it over the junk cheap one that was in it.

Re: Lokar Double Bend Radical 32" vs 23" in a 67
 

I did find one 23" on the forum that a good picture of what it looked like but the 32" I found tried to take you to some off site link that you needed to sign up for to see the pics.

Re: Lokar Double Bend Radical 32" vs 23" in a 67
 

I found the thread but the pics are no longer up. I think I have them stored on my other computer, I'll check when I get home