700R4 Trouble
 

My 700r4 was leaking so i thought id replace pan gasket to see if that would fix it. figured i would put my B&M shift kit in too if i was gonna pull the pan off. (no sense in doing it twice) so i followed directions went slowly and took my time. about 7 hours. heres where it starts to get trippy. it engaged in park, engaged in reverse, and now DRIVE wont engage till i drop column to lowest gear 1. when i get it in drive i can push the petal to the floorboard and barley get up my driveway. engine will rev through the roof almost like im still in neutral but i can slowly move. got up this morning and it magically works fine. still have to drop to 1 but it works fine. shifts all the way through OD. when i went to get gas a few hours later its back to not working how it was before?? what is going on. it cant be any valves or accumulator right? if it was it wouldnt have started working randomly? i got school and work i need help please.

Re: 700R4 Trouble
 

Dumb question but are you sure the fluid level is OK. Did you check it hot?

Re: 700R4 Trouble
 

since the question was stupid you obviously know the answer. so please enlighten me. and yes ive been checking the fluid all day.

Re: 700R4 Trouble
 

Not sure what you mean by your response. But sometimes it's the simplest things that we overlook. Just checking. This site has a be nice to each other theme-Good luck.

Re: 700R4 Trouble
 

Sounds like your transmissions clutches are wiped out.

Re: 700R4 Trouble
 

[QUOTE=jjzepplin;6805905]Not sure what you mean by your response. But sometimes it's the simplest things that we overlook. Just checking. This site has a be nice to each other theme-Good luck.[/Q Oh well .ha ha

Re: 700R4 Trouble
 

Did you properly re attach the TV Cable and Properly adjust? Did you test the line pressure in each gear with a gauge? You can tell a lot about what is going on with those 2 items.