Part # help.. Hub retaining ring
 

Ive got part #3663672 for this part...but I've been unable to cross reference it to any parts stores? Has anyone ordered one of these from a big box chain or online location..if so..what part # did you use to order?

http://i569.photobucket.com/albums/s...pserit1gls.jpg

Re: Part # help.. Hub retaining ring
 

Is that for the rear of a 14 bolt? What's wrong with it?

Re: Part # help.. Hub retaining ring
 

its from a HO52 rear end, floating hub. Ive had some issues with the outer bearing and this was pushed out of the track it sits in when the last bearing ate itself.. id like to replace it to make sure it good to go..

Here is my saga...
http://67-72chevytrucks.com/vboard/s...=1#post6823299

Re: Part # help.. Hub retaining ring
 

Got it. Same set up as the 14b.


Sure the number is correct, not coming up an anything I have here

Re: Part # help.. Hub retaining ring
 

thats the issue.. either am I.. it was a number passed on to me.. but i can't seem to find it..

Hoping someone else has purchased one..maybe a Dorman part number or something...

Re: Part # help.. Hub retaining ring
 

My Dorman book is every bit of 2'' thick and does not have a listing for that

Re: Part # help.. Hub retaining ring
 

I've seen it called a "Hub Retaining Ring" and this web page

http://www.gmpartswiki.com/getpage?pageid=26789

has it as a "ring spacer retainer" with the same part # i have listed above..

Re: Part # help.. Hub retaining ring
 

Bump..

Re: Part # help.. Hub retaining ring
 

The part #'s for flat washers, nuts, and retaining washers are the same for the H052, Dana 60, and the Corp. 14 bolt are the same. Maybe they are for the bearing retainer. I would check the groove in the hub also. It always seems those are tricky to look up. I looked on RockAuto, that's were I got my retaining washers for my 14 bolt, I had to punch the part number into search.

Re: Part # help.. Hub retaining ring
 

thanks for the clarification..