The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Uca & lca (https://67-72chevytrucks.com/vboard/showthread.php?t=641932)

allons 09-02-2014 06:32 PM

Uca & lca
 
I'm in the market to replace the UCA and LCA on my '72 C10. The original components were SHOT and replacement was the best option AND I could get better geometry and sizes. Also, I'm gonna add a large anti-roll bar since mine didn't come with one.

Other than P'built, who makes a good, reliable set-up? Any recommendations? Thank you

Lattimer 09-02-2014 07:28 PM

Re: Uca & lca
 
CPP sells a set, and most seem to like them ok. When I eventually go tubular I'm planning on Porterbuilt because you can get them narrowed 1".

hugger6933 09-02-2014 07:31 PM

Re: Uca & lca
 
Go GM up to 87 will work and so will the 1 1/8 sway bar off a one ton. It will help you out a bunch.

allons 09-02-2014 08:16 PM

Re: Uca & lca
 
Quote:

Originally Posted by Lattimer (Post 6827734)
CPP sells a set, and most seem to like them ok. When I eventually go tubular I'm planning on Porterbuilt because you can get them narrowed 1".

I wanted PB also, and for the same reason, but 4-6 week delivery is now 8+.


All times are GMT -4. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com