292 with Power Steering & Smog Pump
 

I would like to add power steering to my '66 C10 with a 292 six cylinder. In addition to the normal difficulty of getting the pump/brackets/pulleys needed to do that, it is a California truck so it has A.I.R. (RPO K19). The A.I.R. pump sits where the PS pump normally goes.

I have looked through the Shop Manuals and Assembly Manual. I can't find any specific information about the combination of 292 L6 (L25) with power steering (N40) and A.I.R. (K19). Does anybody have an original C/K 10/20/30 truck with this combination, or was it maybe not available in CA ?

Re: 292 with Power Steering & Smog Pump
 

is there a reason you'd keep the A.I.R. pump other than originality?

Re: 292 with Power Steering & Smog Pump
 

Plan A is to simply add PS.

Plan B is to remove all the K19 stuff and then add PS

Re: 292 with Power Steering & Smog Pump
 

i have a ps and air pump setup but i think mine is off of a later truck with a standard head (non integrated ) it is a 292.
Attachment 1304198

Attachment 1304196

Attachment 1304197