The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   TX Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube (https://67-72chevytrucks.com/vboard/showthread.php?t=644690)

WIDESIDE72 09-28-2014 05:57 PM

Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
1 Attachment(s)
I have a pair of nice refurbished 350 SBC stamped steel valve covers and oil fill tube. The outside of the vc's were media blasted primed and painted when my engine was rebuilt. I told the builder that they were just temporary but he cleaned them up anyway. I considered keeping them and even installed a new silver foil Tonawanda sticker. The only flaws are a dent that he left. I hammered most of it out but it cracked the paint. Also the passenger side valve cover has some rust damage, probably from the donor motor sitting with leaves and junk on the intake manifold. I have seven of the eight oem spreader washers as well (i will include the eighth if i find where it fell when i pulled the vc's). Also included is an original fill plug. No bolts included $80 shipped to the lower 48

I also have a nice oem oil fill tube with a new filler plug and new vc grommet. No damage or other issues. $30 shipped to the lower 48

Buyer covers paypal fees

$100 shipped for all

WIDESIDE72 09-28-2014 06:00 PM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
1 Attachment(s)
Rusty spot

WIDESIDE72 09-28-2014 06:02 PM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
1 Attachment(s)
Cracked paint. These are two very small flaws barely bigger than a pencil tip, but full disclosure is my policy!

WIDESIDE72 10-02-2014 10:46 PM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
Offers?

IronCanine 10-03-2014 12:32 AM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
I'll take the oil fill tube assuming no dents or defects...PM me payment info.

Thanks,

Brad

WIDESIDE72 10-03-2014 09:09 AM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
Quote:

Originally Posted by IronCanine (Post 6865422)
I'll take the oil fill tube assuming no dents or defects...PM me payment info.

Thanks,

Brad

As mentioned above "No damage or other issues"

Pm sent with payment info.

IronCanine 10-03-2014 11:28 AM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
PayPal sent...thanks.

Brad

WIDESIDE72 10-04-2014 07:01 PM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
Payment received. Will ship out Monday. THANKS!

WIDESIDE72 03-22-2015 04:54 PM

Re: Nice refurbished OEM 350 SBC stamped steel valve covers and oil fill tube
 
Ttt


All times are GMT -4. The time now is 12:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com