The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Z bar mount question (https://67-72chevytrucks.com/vboard/showthread.php?t=644864)

brawley

09-29-2014 10:31 PM

Z bar mount question

I currently have 68' with a inline 6 engine and was thinking about a V8 swap, are the z bars and mounts different, and if so where can I find them?? thanks

marvgarr68

09-30-2014 03:59 AM

Re: Z bar mount question

The z bar is the same the engine bracket is not.

scott-wisc

09-30-2014 07:04 AM

Re: Z bar mount question

I got everything I needed from the Parts Board. I had to do a little custom fabricating as well.

http://67-72chevytrucks.com/vboard/s...d.php?t=601024

'68OrangeSunshine

09-30-2014 07:29 AM

Re: Z bar mount question

V8 and L6 Zbars are not the same.

cleanfreak

10-01-2014 07:53 PM

Re: Z bar mount question

Just did this one last winter on the green 68 , left the v8 in the 6cyl spot , used the 6 cyl z bar , screwed a clutch ball in the block on my 283 , and never looked at it again. very easy.

FlameOut

10-01-2014 09:26 PM

Re: Z bar mount question

Just swapped out my 250 for a 350. Original z-bar works great. Not sure if there's a difference, but the 6 cyl z-bar does work

All times are GMT -4. The time now is 09:06 AM.