The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - Hood to cowl gasket on a taskforce (https://67-72chevytrucks.com/vboard/showthread.php?t=647614)

tbrown5079

10-25-2014 01:09 PM

Hood to cowl gasket on a taskforce

I know this isn't rocket science but does it matter which way you put the hood to cowl rubber on? Does the split go to the front or back? Does the side with the lip on go on top or bottom? I was in the garage and wanted to do a quick job and thought this would be easy, but then didn't know which way to go. Any suggestions?

Thanks, tbrown

dwcsr

10-25-2014 01:35 PM

Re: Hood to cowl gasket on a taskforce

split to the back

tbrown5079

10-25-2014 10:55 PM

Re: Hood to cowl gasket on a taskforce

OK thanks, I was looking at it again and realized the one side is flat and the other curved so yhe flat side would be on the bottom.

All times are GMT -4. The time now is 02:44 AM.