The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Window resistance (https://67-72chevytrucks.com/vboard/showthread.php?t=647843)

wabash15 10-27-2014 06:39 PM

Window resistance
 
The passenger window in my 72 C10 rolls down very tough for @ the first 1/2 turn of the window crank then very easy the rest of the way down . Rolls up very nicely all the way up. I have lubed everything - what could be causing this?

sprint_9 10-27-2014 07:10 PM

Re: Window resistance
 
My drivers side is doing this, seems worse when mine is cold, like 50 and below. I figured old crappy grease in the window regulator, mine is original yet.

Sammy 10-27-2014 07:21 PM

Re: Window resistance
 
I would guess it would be one of the tracks the roller rides in has a bad spot. If it was difficult both up n down then I would look at the strip n track mounted to the window as not being centered or too far to the rear seen them do that after I put together a door / window assy before. If the rollers n track are fine then highly suspect window regulator has worn out teeth.


All times are GMT -4. The time now is 09:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com