The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=12)

- - Removing 350 Engine (https://67-72chevytrucks.com/vboard/showthread.php?t=648173)

turkeyshooter

10-31-2014 02:12 PM

Removing 350 Engine

Have everything disconnected including motor mount bolts. Ready to hoist. The heads are also removed. What points are the best points to place bolts for the chain hoist to lift engine from compartment?

95 S_Trucker

10-31-2014 04:58 PM

Re: Removing 350 Engine

I like to get 2 short sections of chain, and use the accessory mounting holes and make an X over the valley. Then hook the hoist to the X.

There aren't very many places to attach a chain with the heads already off the block.

There are some on each side by the timing cover, but there aren't any in the rear

All times are GMT -4. The time now is 04:25 PM.