CPP Anodized Aluminum Tie Rod Adjusting Sleeves
 

I am normally over on the 67-72 parts board but this will work well on your trucks...

This is a NEW set of CPP Aluminum Tie Rod adjusting Sleeves part number CP4SC-SAB... I bought these new and CPP sent me the wrong ones... We opened the package to install them and discovered they were wrong so I called them and had to buy a correct set and pay the over night charges so the shop could continue to go forward...

These custom adjusting sleeves are for 1963-70 Chevy Trucks when converting to disc brakes as these sleeves accept the 1973-1987 Outer tie rod and the 1963-70 inner tie rods which are 2 different thread sizes. These are a must have when trying to adapt later spindles to your early truck. These sleeves are light years nicer than anything that has ever been introduced on the market. These sleeves allow you to get away from the ugly steel sleeves with those ugly clamps and go to the new billet sleeves with jambnuts.

These sell at CPP for 69.00 plus shipping... I will sell these for 65.00 SHIPPED

This is my loss and your gain... First I'll take them gets them...

Thanks...

Re: CPP Anodized Aluminum Tie Rod Adjusting Sleeves
 

any chance you still have these?