The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Conversion brake lines (https://67-72chevytrucks.com/vboard/showthread.php?t=650862)

70inline6

11-24-2014 03:02 PM

Conversion brake lines

All right... I've done about four searches, and maybe I just haven't entered the correct terms, but does anyone have a reference for pre-bent brake line kits for when you are converting from the stock, single outlet master cylinder to a dual (or even a dual/power) master cylinder setup?

I want to upgrade the 66's brake system to dual, and before I start bending lines, I want to know if there's a source to buy pre-bent...

Thanks.

Trap62

11-24-2014 05:40 PM

Re: Conversion brake lines

Here's one source:

http://inlinetube.com/Preformed%20Li.../CT-CAT-07.htm

70inline6

11-24-2014 05:46 PM

Re: Conversion brake lines

Just what I was looking for! Thanks!

slowGN

11-24-2014 09:55 PM

Re: Conversion brake lines

Has anyone used any of these two kits
https://www.performanceonline.com/19...RE-BENT-18377/

http://www.classicperform.com/Store/...6066FLK-OM.htm

Thanks

All times are GMT -4. The time now is 02:29 AM.