The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   VA 67-72 Parts Collection for Sale Clearance price (https://67-72chevytrucks.com/vboard/showthread.php?t=651495)

VA72C10 11-30-2014 08:29 PM

67-72 Parts Collection for Sale for under 15% of value
 
PENDING SALE SATURDAY AUGUST 6TH
Okay folks....Last and lowest price. $4000.

Including a new in box 8k dash conversion kit and original big block fan shroud

no lower...not open to offers...all or nothing.

Will offer this for a few more weeks. After that these parts will go in storage so I can clean my garage and the offer is over.


PENDING SALE SATURDAY AUGUST 6TH

ALL OR NOTHING- No parting out and NO Shipping...sorry, I just don't have the time. Someone is going to make a lot of money on this collection!

I have a huge collection of 67-72 parts and am looking to find a new owner....for everything. This is All or nothing on this collection....not looking to sell individually as I do not have the time any more to sell parts individually and ship. I will sell in larger bulk items like my NOS parts, dashes, , visor collection, used moldings, etc. Prefer to have items picked up or can possibly deliver/meet someone on the dashes, trim, NOS parts (smaller parts) at or close to the VA or WV borders pending timing as I travel all over VA and WV for work.

Again...ONLY willing to sell as a complete collection or as large bulk purchases or higher dollar items (, all dashes, all NOS, all consoles, etc). And NO SHIPPING

A brief highlight of the parts:

NOS parts (bezels, A/C controller, several sport mirrors, other mirrors, lenses, unity spotlight bulb, etc)

3 v8 tach dashes- restored tins
2 New V8 tachs with tins
3 tach/vac or air pressure tins
extra Tach dash tins (varying condition)
Dash parts (60 and 80lb oil pressure gauges, air pressure gauges, vac gauges, and hundreds of other gauges)
complete 3 and 7 hole dashes (around 20 complete dashes)
Tilt column
Several 3spd and an one nice auto column and parts
Over 25 Center consoles (seatbelt and cupholder-varying condition)
Bucket seats two pair need foam and some frame repair. Multiple sets of bucket seat brackets.
New Parts (Weatherstrip, New suspension parts, lenses, bumpers etc)
5 and 6 lug front and rears
Stock, rally, and aftermarket 5 and 6 lug wheel sets and individuals
Hoods (all years used varying condition)
Grilles (all years used varying condition)
Fenders (all years used varying condition)
Bumpers (all years and chrome and painted)
Power steering and power brake setups
Engine brackets (stock and aftermarket)
Around 200 pieces of 69-72 lower trim (used varying condition)
Fan shrouds (6cyl, sb, and big block)
Big block parts (frame mounts, brackets)
Hood hinges (several pair)
Vent windows (several sets all need some work-mainly rubber gaskets)
Glass (windshields, side glass, rear glass)
Boxes of wiring- frame, in cab, under hood, extra pigtails/connectors
Dozens of sunvisors
Boxes and boxes of Bolts, fittings, brackets, etc
Tons of emblems
Boxes of mirrors
several Woodgrain glovebox doors
Literature pieces
truck Magazines (hundreds)
Wheel covers
Blazer specific parts
patch panels
Wiring harnesses and wiring
Small block parts new and used

LOTS more...

Will need to be picked up. I will help load. My zip code is 23112. If you mapquest that zip it will get you within 5 minutes of my house.

Will likely need to bring a large box truck or moving truck with a trailer to fit everything...use a couple portable storage containers that can be delivered to you, or take several trips

Link to albums showing pictures of parts...some of these are sold and I've purchased more since this also
http://s562.photobucket.com/user/jro...20April%202010
http://s562.photobucket.com/user/jro...rts%20Pictures


Price reduced to 4500 FIRM for everything. Again, All or nothing and this is my final best offer. This is easily over $34,000 in parts-see below.
Will definitely consider a full or partial trade for a running, driving 67-72 truck, blazer, or burb in good condition (patina fine but not overly rusty) If trade will value collection at 12k for trade purposes (still under 1/2 of real value)...

Here is a spreadsheet with the most current listing of parts. It's $34,090 Retail worth of parts (some have been sold and not updated. And there are many more small parts I haven't listed and other parts I am sure I'll find as I clean up the garage that I will also include.
https://docs.google.com/spreadsheet/...FE&usp=sharing

http://i562.photobucket.com/albums/s...2/IMG_7389.jpg
http://i562.photobucket.com/albums/s...7/IMG_6806.jpg

NO SHIPPING :chevy:

VA72C10 12-02-2014 08:31 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
:chevy:

CST10 12-02-2014 10:18 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Got any 68 hubcaps?

VA72C10 12-12-2014 10:18 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Quote:

Originally Posted by CST10 (Post 6942421)
Got any 68 hubcaps?

sorry, only selling as a complete collection.

1968aj 12-12-2014 10:53 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
would you sell a tach dash and how much

1968aj 12-12-2014 10:58 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
pm sent

VA72C10 12-13-2014 06:10 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Quote:

Originally Posted by 1968aj (Post 6955334)
pm sent

just to be clear, I am not offering shipping on these. Anything sold will need to be picked up.

1968aj 12-13-2014 06:44 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Quote:

Originally Posted by VA72C10 (Post 6956136)
just to be clear, I am not offering shipping on these. Anything sold will need to be picked up.

ok --never mind

VA72C10 12-29-2014 11:28 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Still available...deal pending but haven't heard from potential buyer in a few weeks...may just be Christmas....

VA72C10 02-22-2015 10:46 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Still available. Haven't had time to think about doing anything with this... Open to reasonable offers and trades as mentioned before. At this point still all or nothing.

VA72C10 02-25-2015 02:04 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
Offers? I'd love to free up some room. Looking for a blazer for the family also...

68bowtie 02-25-2015 03:11 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
i'm surprised this hasn't sold yet. i looked through your spreadsheet, and all your "retail" prices seem very reasonable. definitely some fantastic value here for someone...

STEVEG57 02-25-2015 07:33 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
im interested please give me a call when you can .THANKS STEVE 704-284-4780

VA72C10 03-07-2015 02:37 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Quote:

Originally Posted by STEVEG57 (Post 7064848)
im interested please give me a call when you can .THANKS STEVE 704-284-4780

Was good talking with you...checking to see if you had a chance to review the list again...

VA72C10 03-11-2015 12:13 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
ttt

Krex 03-11-2015 11:34 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
Blue arm rests for 72 truck and 350 engine brackets pm me

VA72C10 03-11-2015 02:01 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Quote:

Originally Posted by Krex (Post 7085495)
Blue arm rests for 72 truck and 350 engine brackets pm me

Sorry, not selling individual parts.

VA72C10 03-12-2015 10:13 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
I've gotten a few pm's making offers. I will go ahead and put it out there that 7500 is my rock bottom price. And with that I will want to keep one tach w/ air pressure dash for a future blazer ;)

VA72C10 04-20-2015 10:31 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Price drop to 6800 FIRM or trade ....selling my speedwarning setup separately.

VA72C10 04-23-2015 08:37 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
ttt...open to partial trades on a blazer, truck, or suburban. Will consider adding cash on my end for the right vehicle. Trade value listed above.

Already Gone 04-24-2015 12:17 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
subscribed

teeitup 04-24-2015 07:43 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
I wish you were closer, not all the way across the USA, I'd be buying all your parts, its a good deal.

VA72C10 04-24-2015 07:13 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Thanks, talking with someone now locally... sale pending as we discuss details...

71CHEVYSHORTBED402 04-24-2015 10:40 PM

Re: 67-72 Parts Collection for Sale Clearance price
 
Quote:

Originally Posted by teeitup (Post 7146224)
I wish you were closer, not all the way across the USA, I'd be buying all your parts, its a good deal.

I agree. That and I don't have the room for it. Otherwise I'd snap it up. I'm retired soon, would make for a nice hobby and that's one heck of a start.

I wouldn't drop the price OP. The only variable in question is you need someone in position to do it.

VA72C10 07-01-2016 02:02 AM

Re: 67-72 Parts Collection for Sale Clearance price
 
Getting ready to list our house for sale. Price dropped to 5000 firm for what's left. BMERDOC has possession of many parts so it'll require a trip to my house and then 25 minutes down the road to his house. If it doesn't sell before our house does for the 5000 firm, I will put it in storage or move it to our next house...


All times are GMT -4. The time now is 12:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com