![]() |
74 k20 speedometer dosn't fit
I have a 74 k20 and i found a 77 speedo but it dosnt fit for some reason. It seems like its too deep. Is there a difference between gauges 74-77?
|
Re: 74 k20 speedometer dosn't fit
it should fit the only difference in depth is tach and just gauges.. Sometimes you have to play with them to get them to seat... I had to tuck the bottom under the lip and slowly massage it in
|
Re: 74 k20 speedometer dosn't fit
I think i found out why. I think the gauge cluster is out of a newer truck it has a cutout for the speedo cable and a seperate cutout for what looks like a plug in for something
|
Re: 74 k20 speedometer dosn't fit
2 Attachment(s)
yes some have the speedo clip on the plastic houseing,some on the metal under it
hole might be the one for the Vspeed sensor |
Re: 74 k20 speedometer dosn't fit
Its the top one. Whats the difference between the 2 housings. The speedo i have bottoms out on the housing and dosn't seat all the way.
|
Re: 74 k20 speedometer dosn't fit
1 Attachment(s)
Attachment 1331678
it bottoms out on these 2 screws. Would it mess anything up if i took them out |
Re: 74 k20 speedometer dosn't fit
Quote:
that's a 79 and 88,can't you make holes for them? |
Re: 74 k20 speedometer dosn't fit
I just took them out. There not holding anything and they dont connect to anything
|
Re: 74 k20 speedometer dosn't fit
Quote:
|
Re: 74 k20 speedometer dosn't fit
Remember your 74 is wired for an Ammeter. The 77 will have a volt meter.
http://www.73-87.com/7387garage/inte...achometers.htm |
Re: 74 k20 speedometer dosn't fit
I switched the wiring harness to the 77
|
| All times are GMT -4. The time now is 02:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com