The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Power steering pump help (https://67-72chevytrucks.com/vboard/showthread.php?t=651595)

Dawson67

12-01-2014 08:01 PM

Power steering pump help

1 Attachment(s)

I have a power steering leak on the back of the pump are 2 green plugs plastic the lower port was leaking I replaced the plugs with some bolts with some RTV in the bolts the lower hole is still leaking pretty bad. I did not see any place for a seal are there specific plugs that go in these holes if so where can I find some. I have seen pictures with the lower hole with a fitting with a stud on it. Any help would be greatAttachment 1331592

franken

12-01-2014 08:40 PM

Re: Power steering pump help

Normally there are bolts in there and O-rings between the tin cover and cast pump housing. Chances are some of the O-rings are gone.
I'd blast it off w/ some brake cleaner, pull it apart and see.

Dawson67

12-01-2014 08:44 PM

Re: Power steering pump help

I'll pull the bolt out tomorrow and clean it up and see can the oring be replaced? I was thinking of filling the hole with JB weld tired of this leak��

All times are GMT -4. The time now is 04:35 PM.