Bed floor mounting. The correct way??
 

I'm currently replacing the bed floor in my 1965 short bed fleet side. I'm putting a new front panel in and all new cross sills. What I had to start with was somone elses floor that was pretty shady and it didn't have the correct cross sills. I also have all new stainless strips and mounting kit. I'm going to have to do some modifying of the widths of the boards because my wheel wells are widened. I'm just looking to find a detailed schematic of the mounting to work with. Any help would be greatly appreciated.

Re: Bed floor mounting. The correct way??
 

Look here,

http://www.gmcpauls.com/47-72_BedWood_Info.htm

Also look at Mar-k's website, they have good info also.

I'm doing the same, not an easy task by yourself.

Good luck!

Re: Bed floor mounting. The correct way??
 

Thanks man! I guess my main question are the bolts that go thru all the way thru the cross sills and brackets and bolt directly to the frame. I'll check those sites out.

Re: Bed floor mounting. The correct way??
 

The bed mounting bolts go through the wood, cross members and holes on the bed supports mounted to the frame.

Re: Bed floor mounting. The correct way??
 

Replacing your wood Clyde?

Re: Bed floor mounting. The correct way??
 

yes and on my pickup bed trailer too!

BTW, how are you and yours doing? I hope you all had a wonderful Christmas!