17" steel chevy wheel
 

Hi has any one used these wheels and how did they fit? trying to use them on a 63 http://67-72chevytrucks.com/vboard/a...mentid=1271853

Re: 17" steel chevy wheel
 

Those look like the Toyota FJ wheels. I know someone ran them on a 69 model, but can't remember if he ran a spacer or not.

Found it: Member is TCB-1
Toyota FJ Cruiser rims, 17" x 7.5" wide on a 6 x 5.5" bc. I'm running a .75 spacer on them now, but may take them off when I lower it

Re: 17" steel chevy wheel
 

Not sure on those wheels as to what they are. Easy enough to measure the back spacing. The one thing you will run into with many late model wheels is the diameter of the hole in the center of the wheel. I pulled my rear axles and turned them down on the end to 3.06 I think to allow the wheel to go over the end of the axle. My front was fine with the late model disc brakes on it.
Jimmy

Re: 17" steel chevy wheel
 

they look like late model gm wheel, center bore way to small

Re: 17" steel chevy wheel
 

If they are FJ 17" wheels they have a big center hole. had them on my k10 when i bought it. the other ones as ricky said the center hole is too small. Look at how far the lug nuts holes are from the center hole edge. the FJ's are right at the edge.

Re: 17" steel chevy wheel
 

I know I'm reviving a REALLY old thread but I am looking at using these wheels on my 64 C10 Fleetside and was wondering if anyone knows what size the tires are on the the truck in the pic?

Re: 17" steel chevy wheel
 

A 7.5" width would fit a low profile 245 nicely, maybe a smidge wider.