The 1947 - Present Chevrolet & GMC Truck Message Board Network - OR F/S 4x4 350 exaust manifolds Very NICE

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - OR F/S 4x4 350 exaust manifolds Very NICE (https://67-72chevytrucks.com/vboard/showthread.php?t=656023)

DLTruck1973

01-11-2015 02:29 PM

F/S 4x4 350 exaust manifolds Very NICE

2 Attachment(s)

While looking for a manifold for a another member I found these. They have been acid dipped and media blasted. They are very nice. Both have bevel to run without heat riser. I don't believe they have the correct casting number for the 67-72 era. 175.00 plus shipping. Thanks, Tom

DLTruck1973

02-14-2015 03:04 AM

Re: F/S 4x4 350 exaust manifolds Very NICE

ttt

DLTruck1973

02-24-2015 02:13 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

ttt

DLTruck1973

03-13-2015 05:05 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

A bump for the weekend ;)

3sonsdad

03-14-2015 12:22 AM

Re: F/S 4x4 350 exaust manifolds Very NICE

Hey Tom, what casting number are on these?

DLTruck1973

03-14-2015 03:39 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by 3sonsdad (Post 7089515)

Hey Tom, what casting number are on these?

I will not be at the shop again until Monday. I will take a look at them and get you the casting numbers on Monday.

Thank you for the interest,
Thomas

yfs200p

03-15-2015 09:19 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Interested. Is it just my eyes or do they both say RH as in right side?

DLTruck1973

03-15-2015 10:10 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by yfs200p (Post 7091971)

Interested. Is it just my eyes or do they both say RH as in right side?

Your eyes are just fine and the do both have the same casting number and both have RH stamped on them. These are 4x4 manifolds and will fit on both left and right. Will work perfect for the person who wants to eliminate the heat riser.

These are very nice castings.

Thank you for the interest,
Thomas

DLTruck1973

03-16-2015 11:05 AM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by 3sonsdad (Post 7089515)

Hey Tom, what casting number are on these?

Casting numbers are:

3932461 on both.

Thank you for the interest,
Thomas

DLTruck1973

12-07-2015 05:11 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

still available.

Thank you,
Thomas

DLTruck1973

01-06-2016 04:58 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

ttt

Ugly 61

01-06-2016 06:45 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

I'll give you the $175 if you take care of the shipping
Ugly 61

DLTruck1973

01-06-2016 08:56 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by Ugly 61 (Post 7437604)

I'll give you the $175 if you take care of the shipping
Ugly 61

I can do that. I will send you a PM with payment information.

Thank you,
Thomas

67-72trucks

01-07-2016 01:25 AM

Re: F/S 4x4 350 exaust manifolds Very NICE

Hi Tom, have any more sets like these!? Need a set for a 72 Cheyenne super 4x4.

DLTruck1973

01-07-2016 12:34 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by 67-72trucks (Post 7438152)

Hi Tom, have any more sets like these!? Need a set for a 72 Cheyenne super 4x4.

Hi Mike,

I will check for you. I am actually going through the manifolds this week and sorting the good from the bad and doing clean up.

I will let you know if something comes up. Are you looking for specific casting numbers or just 4x4 ram horns?

Thank you,
Thomas

DLTruck1973

01-07-2016 12:36 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by Ugly 61 (Post 7437604)

I'll give you the $175 if you take care of the shipping
Ugly 61

Sold to Ugly 61 pending payment.

Thank you,
Thomas

AASmedic

08-07-2017 02:13 PM

Re: F/S 4x4 350 exaust manifolds Very NICE

Quote:

Originally Posted by 67-72trucks (Post 7438152)

Hi Tom, have any more sets like these!? Need a set for a 72 Cheyenne super 4x4.

Do you have any more? I am in need of a set.

All times are GMT -4. The time now is 12:07 PM.