The 1947 - Present Chevrolet & GMC Truck Message Board Network - C10 vs C20 ball joints, control arm mount

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - C10 vs C20 ball joints, control arm mount (https://67-72chevytrucks.com/vboard/showthread.php?t=656041)

slotard

01-11-2015 04:48 PM

C10 vs C20 ball joints, control arm mount

The previous owner of my truck just found some parts around that he gave me. Looking at the receipts, I think they may have been for the C10 he had previously (also square body, 77 maybe?). Two sets of ball joints (only one set shown in pics), a PS hose, and a control arm shaft.

Can I use any of these on the C20, or should I sell them?

http://lolinter.net/c20/IMG_0305.JPG

http://lolinter.net/c20/IMG_0307.JPG

http://lolinter.net/c20/IMG_0308.JPG

http://lolinter.net/c20/IMG_0309.JPG

beamn7

01-15-2015 10:02 PM

Re: C10 vs C20 ball joints, control arm mount

The only thing you might be able to use is the p/s hose. Maybe... The bushings, ball joints and shaft are different on C10 vs. C20/C30

All times are GMT -4. The time now is 01:41 AM.