1980 Grille Guard on 1982 Bumper
 

I just got a Luvurne grille guard off of a 1980 Chevy for free. The contour of the bumper is different than mine and I was wondering what the best way to make it fit would be. am I going to have to cut a new contour out of the uprights? Thanks

Re: 1980 Grille Guard on 1982 Bumper
 

could try rubber as a filler and longer bolts?? if you are just for show it could work. not right but work or make an adp. adn use that?

Re: 1980 Grille Guard on 1982 Bumper
 

Yep, cut the contour of the newer bumper into it. The frame is the same, so no issues there.

Re: 1980 Grille Guard on 1982 Bumper
 

The holes should all line up then?

Re: 1980 Grille Guard on 1982 Bumper
 

The mounting holes should be the same, but the Contour is different. Make a cardboard templet of the 82 bumper (where it mounts), and then trace the outline on the guard. trim off areas not needed. Mount up on the 82.:chevy:

Re: 1980 Grille Guard on 1982 Bumper
 

Alright, thanks guys!

Re: 1980 Grille Guard on 1982 Bumper
 

Any suggestions on the best way to cut it would be? I'm thinking torch, but I'd just like some cleaner ideas if possible

Re: 1980 Grille Guard on 1982 Bumper
 

Do you have room for a 4" grinder with zip wheel?, they make a nice clean cut.

Re: 1980 Grille Guard on 1982 Bumper
 

I do, but i don't know if that would be able to follow the curves without too much extra damage