First time c-10 owner...going all in
 

Well I've been looking for a build for quite awhile and I finally found something that caught my eye, a 70 lwb. Two days later I bought a parts truck lol. I figure its already almost off the frame so might as well do a frame off right? I've done this type of work at my job before but this is the first time with my own money haha. Any suggestions of good websites for parts? I've already checked out a few but never hurts to ask. Here she is, not the best pic but its what I have on me.

Re: First time c-10 owner...going all in
 

welcome to the forum! my vote is craigslist... post some more pics when you can, everyone loves pictures!

Re: First time c-10 owner...going all in
 

Welcome to the board, i don't have the website or catalog, but I have most parts new & used,if you need something,let me know.
We have some family in pierce still, its been at least 10 years since we've been there tho.
Tom

Re: First time c-10 owner...going all in
 

Welcome.. What Direction are you planning on going? Everything stock? raising it lowering it? I'm in the same boat as you first time C10 owner. Strip mine down I'm going with airbags and all Porter built suspension. Lot of money and time but I enjoy every min workin on it

Re: First time c-10 owner...going all in
 

Welcome from Omaha! I am in the final stages of my '72 LWB, lots of good parts around if you are patient. Check through threads and ask questions about the different suppliers, it makes a big difference where you get your parts.

Re: First time c-10 owner...going all in
 

Well I plan on doing a frame off but it won't be restored to factory. Will have a 4/6 drop, tubular front control arms, disc brakes all around. I pretty much just plan on getting the frame and suspension done this first year or as much as the check book allows haha. I got the green 71 or 72 here for parts today. I think I've done well so far two trucks one with a complete motor and tranny the other with a disassembled motor and another tranny all for $1150. Oh did I mention one has an 010 block and the other has double hump heads (fist pump lol)

Re: First time c-10 owner...going all in
 

I got most of my parts from Classic Parts, I compared prices on all the parts I needed on a few sites, Classic Parts was $250 cheaper on a $1300 order than the ones I looked at. Received everything in good condition. Don't two trucks through them now and they've treated me well.

Re: First time c-10 owner...going all in
 

I'd say you got some good stuff there for $1,150..!!

Re: First time c-10 owner...going all in
 

I would have to agree with you. I have my motor dug out needs some mods to make it streetable but it should work nicely lol

Re: First time c-10 owner...going all in
 

I use truck and car shop for most of my online part purchases that I can't find here on the forum. Had good luck with the forum and truckandcarshop.com.

Re: First time c-10 owner...going all in
 

Thanks for the websites guys

Re: First time c-10 owner...going all in
 

I second Craigslist. I have a complete rust free 67 front end to be put on mine when it gets here. I don't really use catalog parts unless its driveline or suspension. If its body or interior its local CL or I make it from sheet metal. Welcome and good luck. :metal:

Re: First time c-10 owner...going all in
 

The classifieds here on the forum and the vendors on the home page are the go-to for parts. Much of the mechanical is available thru your auto parts store or Rockauto.com

Re: First time c-10 owner...going all in
 

Ya get anything done lately?

Re: First time c-10 owner...going all in
 

Nope nothing since I got into a rolling chassis. No heat in the garage as well as no insulation. Plus I cant really do most of what needs done until I heal up more. I've been doing some more research tho lol