The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   IA blazer body going to scrap heap (https://67-72chevytrucks.com/vboard/showthread.php?t=659510)

offroden 02-08-2015 08:03 PM
blazer body going to scrap heap
 
2 Attachment(s)
Having what's left of a 70 blazer body going to the big scrap yard in the sky. Not much ggod stuff left but there might be something left saving.

briank 02-08-2015 08:13 PM
Re: blazer body going to scrap heap
 
Do you have the plastic insert and screws on the door near the vent window?

twistedchevy 02-08-2015 08:14 PM
Re: blazer body going to scrap heap
 
Does it still have the wiring harness?

offroden 02-08-2015 08:36 PM
Re: blazer body going to scrap heap
 
Which one?

twistedchevy 02-08-2015 09:02 PM
Re: blazer body going to scrap heap
 
Engine and under dash

undertaker72 02-08-2015 09:11 PM
Re: blazer body going to scrap heap
 
hows the fender emblems and the door handles , do the doors have the tops and end pieces also wing windows, interested in them all

Ridnhi 02-08-2015 11:38 PM
Re: blazer body going to scrap heap
 
I have an auxiliary gas tank in my blazer that I am wanting to take out and I will need to fill in the hole they cut for the fill tube. Would you be willing to cut a patch out of the driver side quarter panel? If you are I will send you a picture of what I need. It would need to be around 6"x6" or so. Thanks Eli

meathead95 02-08-2015 11:51 PM
Re: blazer body going to scrap heap
 
How's the rear floor? Do you still have the gas tank?

72k/5 02-09-2015 12:04 AM
Re: blazer body going to scrap heap
 
If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?

6t727t2 02-09-2015 06:11 PM
Re: blazer body going to scrap heap
 
1 Attachment(s)
Any chance this cowl piece is rust free, inside and out and lower. Not much to ask for :lol:

offroden 02-09-2015 10:08 PM
Re: blazer body going to scrap heap
 
Sorry, It is not rust free.

offroden 02-09-2015 10:10 PM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by 72k/5 (Post 7040251)
If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?
Windshield frame is junk. I think I have the door pieces.

offroden 02-09-2015 10:11 PM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by meathead95 (Post 7040230)
How's the rear floor? Do you still have the gas tank?
Rear floor is junk. Gas tank is a newer aftermarket one.

offroden 02-09-2015 10:12 PM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by Ridnhi (Post 7040217)
I have an auxiliary gas tank in my blazer that I am wanting to take out and I will need to fill in the hole they cut for the fill tube. Would you be willing to cut a patch out of the driver side quarter panel? If you are I will send you a picture of what I need. It would need to be around 6"x6" or so. Thanks Eli
I can do the cut.

offroden 02-09-2015 10:15 PM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by undertaker72 (Post 7039980)
hows the fender emblems and the door handles , do the doors have the tops and end pieces also wing windows, interested in them all
No fender emblems . have the door handles and wing windows

offroden 02-09-2015 10:15 PM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by twistedchevy (Post 7039963)
Engine and under dash
I have the engine one.

72k/5 02-09-2015 11:57 PM
Re: blazer body going to scrap heap
 
Ok cool let me know when you find the door pieces.

briank 02-10-2015 11:33 AM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by briank (Post 7039848)
Do you have the plastic insert and screws on the door near the vent window?
Do you have these?

hooverfish 02-10-2015 05:54 PM
Re: blazer body going to scrap heap
 
1 Attachment(s)
nevermind

michael bustamante 02-10-2015 06:49 PM
Re: blazer body going to scrap heap
 
brake booster assy? is it disk or drum fronts? and how much shipped?

offroden 02-10-2015 09:59 PM
Re: blazer body going to scrap heap
 
Quote:
Originally Posted by michael bustamante (Post 7042814)
brake booster assy? is it disk or drum fronts? and how much shipped?
100. It is disc.

Ridnhi 02-11-2015 11:10 PM
Re: blazer body going to scrap heap
 
1 Attachment(s)
Quote:
Originally Posted by offroden (Post 7041598)
I can do the cut.
Here is what I need. I am measuring from the back edge of the door jamb. I need a piece that starts at 13" back to the 20" mark. From the top of bed rail down I need from 1" down to 7" down. This should give me enough for hole and some extra. Thanks! Eli

Ridnhi 02-11-2015 11:11 PM
Re: blazer body going to scrap heap
 
1 Attachment(s)
Other pic

72k/5 02-13-2015 12:28 AM
Re: blazer body going to scrap heap
 
Have you had a chance to see if you had any of the door pieces I am interested in?

offroden 02-16-2015 09:42 PM
Re: blazer body going to scrap heap
 
2 Attachment(s)
Quote:
Originally Posted by 72k/5 (Post 7040251)
If they are still available and any good. I would be interested in the windsheild frame(header piece) the latch reinforcement on the doors and the little door catch pieces?
Are these what you need?


All times are GMT -4. The time now is 06:00 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com