The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   GA WTB factory Blazer springs (https://67-72chevytrucks.com/vboard/showthread.php?t=660760)

hold24 02-19-2015 07:54 AM

WTB factory Blazer springs
 
WTB factory front and rear springs would like the heavyduty fronts but would look at all... They can ship ups..
thanks

1rippen6 02-19-2015 08:00 AM

Re: WTB factory Blazer springs
 
I should have a set will try and look tonight but is suppose to be -27 with the wind chill tonight do you need all 4

jjzepplin 02-19-2015 08:16 AM

Re: WTB factory Blazer springs
 
I have some fronts.

hold24 02-19-2015 08:23 AM

Re: WTB factory Blazer springs
 
Quote:

Originally Posted by 1rippen6 (Post 7055853)
I should have a set will try and look tonight but is suppose to be -27 with the wind chill tonight do you need all 4


I do need all four... Do you know if the blazer had heavy front springs?? Take your time don't freeze too death looking for them... That's cold high today in canton ga a mild 21 degrees before wind chill....

NuBomb 02-19-2015 08:41 AM

Re: WTB factory Blazer springs
 
I'm planning on a spring lift in a few months. Maybe you can take a look at them some time soon.

1rippen6 02-19-2015 08:42 AM

Re: WTB factory Blazer springs
 
I am not aware of heavy front springs for a blazer but could be wrong. I believe the fronts on a blazer and truck are the same length so could probably go that route for heavy duty.

hold24 02-19-2015 08:01 PM

Re: WTB factory Blazer springs
 
Quote:

Originally Posted by 1rippen6 (Post 7055885)
I am not aware of heavy front springs for a blazer but could be wrong. I believe the fronts on a blazer and truck are the same length so could probably go that route for heavy duty.

It says heavy front springs on my spid

1rippen6 02-19-2015 09:08 PM

Re: WTB factory Blazer springs
 
Learn something new everyday I have the spid from the blazer I removed the springs from but the problem is I only have one front spring. I remember the spring eye was broke on the one side so I just threw it out but do have a set of rears.


All times are GMT -4. The time now is 01:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com