|
Low buck 53' 3100 5 window
Just got this last week. keeping everything old school with a 4" drop, white walls steel wheels with no caps. Pretty straight and not to bad on the rust. more pictures to come before I get started. This was before I pulled it home.
http://i766.photobucket.com/albums/x...ps7a642c24.jpg http://i766.photobucket.com/albums/x...ps64c160ff.jpg http://i766.photobucket.com/albums/x...ps553bfc8e.jpg |
Re: Low buck 53' 3100 5 window
looks like a nice start. keep us posted with the updates and pictures. Everyone likes pictures..
|
Re: Low buck 53' 3100 5 window
Quote:
|
Re: Low buck 53' 3100 5 window
Cool find, enjoy the build!
|
Re: Low buck 53' 3100 5 window
Very cool heater.
|
Re: Low buck 53' 3100 5 window
Ordered a bunch of parts this week for the interior and electrical. This weekend I'm going to clean the engine up a little and pull the oil pan to see what I can tell about the condition of the motor. The motor is a 235 out of a 55'. I would like to keep this set up but if it's no good I'll find a running used 305 or 350 to put in.
|
Re: Low buck 53' 3100 5 window
FYI if you need odds and ends there is a guy named Dean up in Bentonville who has a nice stockpile of parts for these trucks. He used to buy and sell on Craigslist.
|
Re: Low buck 53' 3100 5 window
Quote:
|
Re: Low buck 53' 3100 5 window
No idea, its been about 5 years but I could show you where he lives on a map...will do that when my computer starts cooperating. He parted these trucks and always had a few cabs, frames, and such outside. In his barn are stacks of doors, steering wheels, glass, etc. I will dig around my old e-mails and see if I find anything too. Last time we connected I posted a "WTB" on Craigslist.
|
Re: Low buck 53' 3100 5 window
1 Attachment(s)
Pressure washed the engine and under carraige just to get it somewhat clean. Pulled the plugs again and the inspection plate off the bottom of the trans. First good news was it turns over well by hand. I pulled the oil pan after draining the oil. Nothing concerning in the pan. Pulled one of the journals off so far and I think it looks pretty decent. Crankshaft looks good too. I'm going to pull the rest and the connecting rod bearings.
Pic's are not great tho. |
Re: Low buck 53' 3100 5 window
2 Attachment(s)
Let me know if you see any issues. Thanks
|
Re: Low buck 53' 3100 5 window
Thats so crazy nice.......good luck with the build......
|
Re: Low buck 53' 3100 5 window
I agree, really clean looking bearings. Have fun!
|
Re: Low buck 53' 3100 5 window
It's so nice to work on something for change that has so much room everywhere you turn. I'm really going to enjoy this. Everything else I've done you have to scrap a layer of skin off all your knuckles to get the easiest spark plug out. What a blessing simplicity is.
|
Re: Low buck 53' 3100 5 window
Crankshaft bearings were good. the connecting rod bearings were scorched and I could feel variations in texture on the crank. Going to pull it and put in a v8. With that said if I put in a 305/350 with th350 trans am I going to need a custom drive shaft? I believe my 3 speed is the longer one. Has a long tail.
|
Re: Low buck 53' 3100 5 window
Found a nice stock 305 with th350 fully dressed for $600 78K. Just pulled out 2 months ago. I'll get some pic's this weekend pulling out the 6.
|
Re: Low buck 53' 3100 5 window
Tore the front down today after lunch. going for the bed tomorrow and interior.
Think i'm going to change directions a little. Gonna do the S10 swap. http://i766.photobucket.com/albums/x...ps27oj4sas.jpg |
Re: Low buck 53' 3100 5 window
is the frame bad?
|
Re: Low buck 53' 3100 5 window
No, but by the time I redo brakes, wheel bearings, ball joints and a drop axle with the modified steering arms I could just swap in a S10 frame for less.
|
Re: Low buck 53' 3100 5 window
I can only find one spot with rust holes in the frame. It's a small area about where the bed meets the cab.
|
Re: Low buck 53' 3100 5 window
Did some searching last night, gonna keep the original frame.
|
Re: Low buck 53' 3100 5 window
I think you will be glad you did
Very nice project! |
Re: Low buck 53' 3100 5 window
Still going with drop axle or ?
|
Re: Low buck 53' 3100 5 window
Yes, gonna do a 4" drop axle. 4" blocks in the rear. Maybe remove a few leaves.
|
| All times are GMT -4. The time now is 07:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com