The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - motor mounts for sbc 350 (https://67-72chevytrucks.com/vboard/showthread.php?t=660871)

dhamilton62

02-19-2015 10:43 PM

motor mounts for sbc 350

In your opinion what would be better to run for motor mounts in my 62 C10. I have a set of mounts for a SBC 350 from a 67-72 C10 as well as the mounts off an 1984 C10. I'm doing the front cross member swap with the 1984 C10 front end, so would it be better to use the 84 motor mounts or go with the earlier since I know a lot of guys are running those mounts with a 1" spacer to lift it off the frame. Any tips or advice would be amazing!

par4tom

02-20-2015 12:16 AM

Re: motor mounts for sbc 350

1 Attachment(s)

The 67-72 motor mounts worked great on my 61. 1" spacer at the top of the frame and pretty easy. Plug and play...
Tom

Captainfab

02-20-2015 01:31 AM

Re: motor mounts for sbc 350

In my opinion the '73+ engine mounts are a much better design. However the C20/30 frame brackets would be a better fit to your '62 frame. They will still require a spacer, but not as tall of one.

All times are GMT -4. The time now is 04:37 AM.