The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - vent window seal installation (https://67-72chevytrucks.com/vboard/showthread.php?t=661805)

justin4260

02-28-2015 01:08 PM

vent window seal installation

3 Attachment(s)

im installing the vent window seal on a 70 and i can't get the corner to go in the groove. I've tried just putting everything else in but when you close the window it pulls the corner off. anybody don this recently?

Ugly 61

02-28-2015 04:57 PM

Re: vent window seal installation

I just did both sides for a 72 GMC I'm working on I sprayed the rubbers with WD40 for lube and the used the front of my bench vice as a mandrel it was just the right radius. When I pushed the frames up aginst the vice the rubbers seated perfectly.
Ugly 61

justin4260

02-28-2015 07:47 PM

Re: vent window seal installation

thanks ill try that

All times are GMT -4. The time now is 12:40 PM.