The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Shifter questions (https://67-72chevytrucks.com/vboard/showthread.php?t=662057)

hillbean 03-02-2015 02:17 AM

Shifter questions
 
Hey guys you all have been a great help so far on my project. I built the trans crossmember have the engine and trans installed. Im now looking at shifters i would like to do a column shift my question is is it possible to safely change a three on the tree to automatic. If its not i was looking at some universal floor shifters and wanted some opinions im considering the mr gasket one like this
http://www.ebay.com/itm/361206120614...%3AMEBIDX%3AIT
or one like this
http://www.bmracing.com/products/807...&md=&smd=&eng=
has anyone used these how do they look and feel. I dont want to drop a ton of money but the mr gasket one looks a lil janky and doesnt come with a neutral safety switch. any help you guys provide is much appreciated thanks in advance

vince1 03-02-2015 06:53 AM

Re: Shifter questions
 
You might want to try Lokar to get one specific for the transmission you are using. Probably costs more but might be worth it for better results.

Hollow65 03-02-2015 07:49 AM

Re: Shifter questions
 
I use a B&m mega shifter, had it for 16 years. I would go b&m or Lokar. Like stated above they're trans specific, different length cables.

JJLT1 03-02-2015 09:40 AM

Re: Shifter questions
 
I have the b&m lite truck mega shifter, its taller for a truck..
check out the b&m quicksilver too..
http://www.bmracing.com/products/806...&md=&smd=&eng=
http://www.bmracing.com/products/806...&md=&smd=&eng=

66LSx 03-02-2015 07:50 PM

Re: Shifter questions
 
I used my 3 on the tree column for my 4L60e without issue....

https://scontent-ord.xx.fbcdn.net/hp...5d&oe=55878109

https://scontent-ord.xx.fbcdn.net/hp...bf&oe=558BDA5B

https://scontent-ord.xx.fbcdn.net/hp...c2&oe=557DB66E

https://fbcdn-sphotos-b-a.akamaihd.n...98581325_o.jpg

hillbean 03-02-2015 11:56 PM

Re: Shifter questions
 
Did you just use a universal linkage and make it work for the three on the tree to the auto?

northern 03-03-2015 03:40 AM

Re: Shifter questions
 
Very nice 66LSx

hillbean 03-17-2015 04:21 AM

Re: Shifter questions
 
3 Attachment(s)
So after alot of thinking and pondering i was at the pick and pull and grabbed a jeep shifter and made this and was looking for some opinions on the look before I finish the install in the truck.


we few we happy few we band of brothers for whoever has shed his blood with me shall forever be my brother

61_FL_Apache 03-17-2015 08:13 PM

Re: Shifter questions
 
I like it!! I get tired of most people using Lokar shifters.. They are everywhere..

hillbean 03-18-2015 09:58 AM

Re: Shifter questions
 
61 Fl Apache thanks man and i love your build thread im looking into bagging my 60 soon as long as money and time permits.
Quote:

I like it!! I get tired of most people using Lokar shifters.. They are everywhere..

markeb01 03-18-2015 03:19 PM

Re: Shifter questions
 
I like it too. Throw a shift boot over it and everybody will ask what it is, where you got it, etc. Cool and unique!

earl84 03-18-2015 03:30 PM

Re: Shifter questions
 
Diggin' the bullet casing button. I like the shifter a lot.
On closer examination, that's an old grenade body as well. Now I like it even more!

61_FL_Apache 03-18-2015 06:52 PM

Re: Shifter questions
 
Quote:

Originally Posted by markeb01 (Post 7095912)
I like it too. Throw a shift boot over it and everybody will ask what it is, where you got it, etc. Cool and unique!

Throw a Crown Royal bag at the base.


All times are GMT -4. The time now is 06:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com