The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - Can you use your stock crossmember (https://67-72chevytrucks.com/vboard/showthread.php?t=662297)

blazercrazy70

03-03-2015 11:42 PM

Can you use your stock crossmember

I am sure this has been asked just wondering if you can use your stock transmission crossmember with a 4l60e

LockDoc

03-03-2015 11:53 PM

Re: Can you use your stock crossmember

Quote:

Originally Posted by blazercrazy70 (Post 7075228)

I am sure this has been asked just wondering if you can use your stock transmission crossmember with a 4l60e

Yes, I used my th350 crossmember in my Panel truck. Bolted up to the factory holes and the driveshaft fit.

LockDoc

BR3W CITY

03-04-2015 03:12 AM

Re: Can you use your stock crossmember

Quote:

Originally Posted by blazercrazy70 (Post 7075228)

I am sure this has been asked just wondering if you can use your stock transmission crossmember with a 4l60e

Yep, you can use it for any of the trans options. The only differences are length (so slide it back and drill new holes), and what rubber mount sits on top. When I switched to an 80e, it used an extra center hole, but thats it.

Prob the easiest step in the swap, 20 minutes and your done.

All times are GMT -4. The time now is 06:55 PM.