ISO: Rubber floor liner for my 71 low hump
 

Looking for a factory style rubber floor liner..Looking for factory type..Thanks in advance

Re: ISO: Rubber floor liner for my 71 low hump
 

They didn't use much ink on that SPID did they? Just a guess by looking in on the pic. Have you looked at ACC? they carry a lot of that stuff and are one of the top makers of floor coverings. Whenever I wonder about a part I type it in the search box of E-Bay. Jim

Re: ISO: Rubber floor liner for my 71 low hump
 

acc?

Re: ISO: Rubber floor liner for my 71 low hump
 

In Search Of? There are lots available in the aftermarket. Some of the site vendors here sell them. Classic Heartbeat, Brothers Truck Parts are 2 of them. LMC Truck as well.

Gary

Re: ISO: Rubber floor liner for my 71 low hump
 

Put the new rubber floorliner/mat I got from classic parts..The picture doesn't do it justice..very nice replacement..I would recommend to anyone!

http://www.classicparts.com/1967-72-...tinfo/39-033/#

Re: ISO: Rubber floor liner for my 71 low hump
 

That for that post Pablo101 I need one too, that looks good.

Re: ISO: Rubber floor liner for my 71 low hump
 

Hey pablo101, would you mind posting a picture of the driver's side of the floormat? Kind like the picture you posted but of the driver's side.

Thanks.

Re: ISO: Rubber floor liner for my 71 low hump
 

Yah sure thing...I'll be tinkering on it sunday and I'll take a clearer picture

Re: ISO: Rubber floor liner for my 71 low hump
 

Much appreciated. The passenger side shot is fine. The original mats had a slightly different molding in the driver's side foot well. Just curious if they keep the original style. Also, is the mat nice and flexible?

Re: ISO: Rubber floor liner for my 71 low hump
 

cericd,
yes they kept the original style. The mat is flexable, it was rolled and boxed. I laid it out on my livingroom floor there were no creases. When I put it in it was 40-42 degrees outside..

Re: ISO: Rubber floor liner for my 71 low hump
 

Hi pablo, were you able to get a picture of the drivers side of the mat?

Thanks.

Re: ISO: Rubber floor liner for my 71 low hump
 

I wasn't able to Sunday, my daughters birthday events spilled over from saturday to sunday. I will this !

Re: ISO: Rubber floor liner for my 71 low hump
 

Sounds good. Thanks!

Re: ISO: Rubber floor liner for my 71 low hump
 

I tried to get as clear pics as possible

http://i531.photobucket.com/albums/d...psbxbr7ltq.jpg

http://i531.photobucket.com/albums/d...psyeafgztt.jpg

http://i531.photobucket.com/albums/d...psvedpefbn.jpg

Re: ISO: Rubber floor liner for my 71 low hump
 

I bought one for a low hump from Brothers, hole for dimmer was in wrong location, sent it back, second one split right down the middle of hump within a year. No one ever even put a foot on it ever ?:metal:

Re: ISO: Rubber floor liner for my 71 low hump
 

Got it! Thanks pablo101!

Re: ISO: Rubber floor liner for my 71 low hump
 

Pablo,

How long have you had it? I agree, it is a nice looking mat, but many have complained of late, that they either dry rot, and/or crack in pretty short order as blackhornet says below:

Re: ISO: Rubber floor liner for my 71 low hump
 

I've had it in the truck a weekish..haha..IMO at this point it's Def worth the money.

Re: ISO: Rubber floor liner for my 71 low hump
 

Is the hole for the dimmer switch in the correct location? Any modifications or trimming required?

Re: ISO: Rubber floor liner for my 71 low hump
 

Dimmer switch hole lines up perfect plus the 2 pin things on the passenger side. No cutting no modifications at all..

Re: ISO: Rubber floor liner for my 71 low hump
 

Great. Looks like I'll be ordering this soon. Thanks again.