yukon / tahoe/ escalade third row seat bracket for K5
 

I have followed in the footsteps of others and bought some 3rd row seats (2008) from a yukon. i do NOT have the original brackets yet. Question is, do the brackets from ALL of the three vehicles mentioned fit the seats from all three also? i don't want to buy the wrong ones.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

is it a bench or double bucket? the double buckets have more mounting points than the bench seats.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

Ack sorry, double seats split down the middle.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

Bueller, Bueller?

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

This is what you need. Installed these about three months ago. Worked great.


http://www.ebay.com/itm/00-2013-Univ...3D321635918753

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

Awesome - did you just bolt them into the floor? and were you able to use any of the existing Bolt holes? Also were these in a 75 or older? I ask this as they have no footwell in the rear so I want to check that the seats aren't too low.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

This is in a 1975 k5. I had to drill holes. If you would like I can send you pictures.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

That would be absolutely brilliant. mine is also a 75 and the seats are are incoming. I'llpm you my email address for ease.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

I think we'd all like to see. At least I know I would. I've been considering this mod myself.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

I will record progress as I go. I'm trying to avoid a bunch of drilling into the tub.

Re: yukon / tahoe/ escalade third row seat bracket for K5
 

Quick question for Mpierce. you bought that bracket set from ebay. What is the WIDTH and depth of the three front brackets please? trying to figure how wide a piece of steel i would need to mount them to.