1970 3/4 ton Dana 60 rear hubs
 

These have been sold.
I have 2 rear hubs for a 3/4 ton Dana 60. After purchasing a replacement rear end for my 72. I found out that the studs were 1/2" and I needed 9/16". I found some hubs off of a 71-72 rear end, and replaced them. I do not need these, hoping someone might have a use for them. They are probably only worth what it would cost to ship them.
Paul

Re: 1970 3/4 ton Dana 60 rear hubs
 

shipping to 14063 couldnt change the studs out? ps: im still needing dana 60 rear brake hardware if ya see anything your way. (12'')

Re: 1970 3/4 ton Dana 60 rear hubs
 

You wanting both of them? I imagine I could have changed them out. It was probably cheaper for me just to buy good used ones. Did any of the brake hardware I sent you work.
Paul

Re: 1970 3/4 ton Dana 60 rear hubs
 

i'll take both if they are good shape. i rebuilt my hubs so these will g spares. i 4got i got brake stuff from ya lol. i havnt got that far, been workin at the front end. let me know price

Re: 1970 3/4 ton Dana 60 rear hubs
 

I had to drill my hubs out to accept 9/16 studs. It can be done. .

Re: 1970 3/4 ton Dana 60 rear hubs
 

Paul,
I haven't done much as far as checking out shipping. I can get one in a large flat rate box if I bulge the box some. They are around $18.00 a piece I think. If you want I can check on other shipping options. Let me know.
Paul

Re: 1970 3/4 ton Dana 60 rear hubs
 

find a box that will fit both.

Re: 1970 3/4 ton Dana 60 rear hubs
 

Dang, somehow missed this post. If for some reason gmc2500 doesn't take both I'll take one. I've got a hub that the inner race spun and hogged out the hub. Thanks.

Re: 1970 3/4 ton Dana 60 rear hubs
 

I found a box for both and got an online quote. The quote was $50.00 they weigh around 38 lbs. box 14" x 14" x 8".
Paul

Re: 1970 3/4 ton Dana 60 rear hubs
 

sounds good. pm me your payment details

Re: 1970 3/4 ton Dana 60 rear hubs
 

pass them on to afrance. mine are 9/16 sorry

Re: 1970 3/4 ton Dana 60 rear hubs
 

That was close, I almost shipped them Saturday.

Re: 1970 3/4 ton Dana 60 rear hubs
 

i was in shop last 2 days and checked mine, sorry again

Re: 1970 3/4 ton Dana 60 rear hubs
 

No problem, afrance you are up if you want these.
Paul

Re: 1970 3/4 ton Dana 60 rear hubs
 

I would love one of them. I'll PM you for details.

Thank you, Alan

Re: 1970 3/4 ton Dana 60 rear hubs
 

Would these fit on a 1 ton with a eaton ho72?

Re: 1970 3/4 ton Dana 60 rear hubs
 

I would say no. A ho52 may work. You might want to ask in the discussion forum.
To The Top
I have one left.

Re: 1970 3/4 ton Dana 60 rear hubs
 

To the top
Still have one left that needs a good home.