Need alittle help on power steering brackets
 

I'm doing a v8 swap on my 67 chevy c10. I put a built 350 in it that I built. I'm try to wrap things up. Having alittle trouble trying to mount my power steering. I got a 71 chevy van power steering with brackets. Try to use the brackets but there not working. How did y'all mount your power steering? If you a got pictrues I wound like to see them. Here's a picture of my engine.

Re: Need alittle help on power steering brackets
 

350

Re: Need alittle help on power steering brackets
 

well, these trucks that came with power steering, all had the "Short" water pump, you have a "Long" water pump installed on your engine, you will need brackets from a later ('73 on) chevy truck/car in order to make it work. (I had the same issue) the brackets for the alternator is way different, as it bolts to the thermostat housing and there is a lower bracket that bolts to the front of the water pump.the power steering brackets are pretty much the same, some are just a little different, but not by much. here are some bracket pictures, hopefully, you'll have an idea of what's needed....
Ben:metal:

Re: Need alittle help on power steering brackets
 

ohh so thats what the rear bracket is supposed to lok like! I used a slide bracket from a 68 chevy 250 alternator bracket to adjust my waterpump on my 77 350 with long waterpump.
now i know what to look for
what wheels are you using that accept those ceneter caps? steelies right?
are the nubs on the inside or outside?