Speedwarning Parts or complete cluster
 

I'd sell the parts for someone to make a show quality Speedwarning tach dash for 460 shipped. ( NO printed circuit, NO tach, No lens, No gauges other than the speedwarning speedometer) with:

• restored tach tin with correct grounding pin
• inner tach tin
• original buzzer and wiring
• original cable with nice adjustment knob and nut included
• Really nice speedwarning head (tested to work w/ buzzer and wiring)
• I will include three matching restored back tins for the oil pressure gauge, temp and ammeter, and fuel gauge.

Or all the same listed above with a tach/vac or air inner tin swapped for 510 shipped

Or, I can put one together with my nicest OE parts, nice factory lens, new bezel, new printed circuit, and new temp gauge with a show quality factory 8 cyl tach or professionally restored show quality 6 cyl tach for 820 shipped with insurance. Will include tach wiring harness for points or HEI and correct wiring and buzzer. All tested working.

First to say they will take it in the thread.

http://67-72chevytrucks.com/vboard/a...1&d=1354337005

http://67-72chevytrucks.com/vboard/a...1&d=1354337005

Re: Speedwarning Parts or complete cluster
 

ttt

Re: Speedwarning Parts or complete cluster
 

if i wasn't penny pinching to buy a truck i'd love to have a completed sw/tach dash! bump for you...

Re: Speedwarning Parts or complete cluster
 

I'll take it! The super duper delux setup!
PM me and we'll work the details.
Can I save a few bucks by picking up in person?
By any chance could you use a woodgrain dash face?
Thanks!
Randy

Re: Speedwarning Parts or complete cluster
 

sounds good...

let's keep the main details in the thread to avoid confusion...
you're looking at the 820 shipped version...
v8 or 6cyl tach?
I have a reproduction woodgrain bezel and a nicer woodgrain from Cheyenne super man with a matching glovebox door insert piece with woodgrain. Can send pictures of both. The repro bezels don't have the best fit on the woodgrain. I can include that one at no charge. The CSM bezel and matching glovebox piece would add 150 to the price.

Shipping is around 40 with insurance so if you chose to pick up it would be 780 instead. I also work in MD from time to time and may be able to meet you somewhere if close to one of my customers.

With me needing to finish this up and assemble it I will likely need a couple weeks time. I am out of town most of the week for appointments and have busy weekends also.

will get pictures of the woodgrain options and post them here soon. Once we determine exactly what you're wanting I'd like to receive payment via paypal (with fees paid) or postal money order since I'll be doing the work putting this together vs selling just the parts.

Re: Speedwarning Parts or complete cluster
 

That would be for an 8 cyl tach. Could you please post pics of the OEM CSM wood grain bezel and glovebox insert

So the "deluxe" option is a complete cluster w/all gauges ready to bolt in and run? I just want to make sure we're on the same page...
Thanks,
Randy

Re: Speedwarning Parts or complete cluster
 

Will post pictures this evening. Yes, the "deluxe" option would be ready for you to install including all wiring needed. Just will need to let me know if you have points or HEI distributor for the proper harness for the tach.

Re: Speedwarning Parts or complete cluster
 

Bottom is cheaper aftermarket. (Chrome behind wood and lettering is chrome). Top is csm bezel.

Re: Speedwarning Parts or complete cluster
 

Csm glovebox door piece with backing plate for correct look.

Re: Speedwarning Parts or complete cluster
 

Closeup of csm bezel

Re: Speedwarning Parts or complete cluster
 

Closeup of cheaper aftermarket woodgrain bezel

Re: Speedwarning Parts or complete cluster
 

I've got HEI. The CSM bezel and glovebox insert look good. I'll take those also! I've got an aftermarket bezel and you're 100% correct - the woodgrain inserts just don't fit very well...

So now the total is?

I live down in Southern Maryland about 25 miles from the Harry Nice bridge on 301. We could figure out a place to meet, or if it's easier for you, you could box up all the stuff and I could assemble. I've got to change some stuff as soon as I get it anyway. I've got the ammeter to voltage gauge conversion to do and also swap out the 60 PSI oil pressure to 80 PSI gauge.

Any break on price if I assemble?

Thanks!
Randy

Re: Speedwarning Parts or complete cluster
 

It would be 780+150 or 930 assembled. If I leave out the 60lb oil gauge and the ammeter and deliver boxed up ready to assemble I'd do 850 total. Let me know.

Re: Speedwarning Parts or complete cluster
 

Done deal, Jonathan! $850 coming your way! OBTW, I sent you a PM about sport mirror reinforcements...

Please PM me with paypal info.

Thanks!
Randy

Re: Speedwarning Parts or complete cluster
 

sending pm

Re: Speedwarning Parts or complete cluster
 

Jonathan - PM'd you back.
Randy

Re: Speedwarning Parts or complete cluster
 

Got it. Sold pending delivery and payment.