1966 C10 stepper--5.3/4l60e budget build
 

Well I'm going to start a build thread for my c10. I'm currently in the middle of my LS swap. It's a slow process as I don't have a ton of time to devote to it. I'll be posting pics as I get more done...

http://i1031.photobucket.com/albums/...14BDF647C9.jpg


http://i1031.photobucket.com/albums/...509DB7A818.jpg


http://i1031.photobucket.com/albums/...5A47C632DD.jpg


http://i1031.photobucket.com/albums/...6BC63D58F8.jpg

Re: 1966 C10 stepper--5.3/4l60e budget build
 

http://i1031.photobucket.com/albums/...71C517168D.jpg


http://i1031.photobucket.com/albums/...7D00529A57.jpg


http://i1031.photobucket.com/albums/...EA10F50308.jpg


http://i1031.photobucket.com/albums/...22A203B9C3.png

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Tearing down the 5.3 harness.

http://i1031.photobucket.com/albums/...A28A09BED5.jpg


http://i1031.photobucket.com/albums/...5BC73EB863.jpg

Re: 1966 C10 stepper--5.3/4l60e budget build
 

http://i1031.photobucket.com/albums/...51D54708B2.jpg

http://i1031.photobucket.com/albums/...E792422606.jpg


http://i1031.photobucket.com/albums/...B1B0D59592.jpg


http://i1031.photobucket.com/albums/...D930CE5B3A.jpg


http://i1031.photobucket.com/albums/...EF6CA174DD.jpg

Re: 1966 C10 stepper--5.3/4l60e budget build
 

http://i1031.photobucket.com/albums/...C3C3CF7E1A.jpg


http://i1031.photobucket.com/albums/...B46FB95B7C.jpg


http://i1031.photobucket.com/albums/...00363F1A8D.jpg

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Scored some parts to convert to disk front. Also have all the stuff for bags. Have to cup my lower control arms for that.

http://i1031.photobucket.com/albums/...B27FADC513.jpg

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Looks good so far. I've started my 5.3 into my 72 this week. I'm waiting for a little more progress to start my own thread lol.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Nice. Also working on a 5.3L swap. In the process of cleaning the block for paint.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Yeah mine isn't going to be pretty this time around. Wanna get it driving and on air. Eventually I would like to build it and coat the frame and make it not yellow any more haha

Re: 1966 C10 stepper--5.3/4l60e budget build
 

this may be a stupid question.. what motor mounts are those? they look simpler than my stock 68 ones with e-bay plates

Re: 1966 C10 stepper--5.3/4l60e budget build
 

https://www.performanceonline.com/19...ION-MOUNT-KIT/

That's the kit I used. I like it better than factory mounts.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

I used that one also screech.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Hello from Missoula! Project is looking good so far! In a part of the country where you don't see allot of lowered or bagged vehicles I think it is awesome you are! Cant wait to see how this goes!

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Right on! Thanks for the encouraging words. It sure is a slow process for me but I'm excited to get this thing done!

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Hey, I like your build. Nice truck. My son has a 65 chevy truck and I have a 68. How did you put the newer wheels on the truck?

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Most likely wheel spacers like in the photo on post #6. The thick machined spacers in the photo that bolt to the stud and have studs in them that then bolt to the wheel work well and seem to be good quality and pretty safe. The thin ones that are also shown in that picture are a little questionable because they just get sandwiched between the wheels and the mounting flange and can through vibration, heat, and cold cycles possibly loosen the lug nuts.

I think the better question would be how thick of a wheel spacer did you use to make those awesome 20" wheels fit?

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Correct. They are technically called wheel adapters since they have new studs on the spacers. They are the same lug pattern as factory. I honestly can't remember but I think it was 1.25. I only needed like 3/4 inch but couldn't get that small and have new lugs on the adapter.

Thanks on the wheels. They are off a 2014 Chevy half ton. I love the look. I think they modernize it a touch.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Does anyone know if I could adapt the power steering unit from the newer Chevy to work with my old system? Since I have the pump for the 5.3 already and have the unit from the 2000 already.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Take the pressure regulator nut off you old 6 cylinder pump, It will thread in place of the nut on the 2000 pump, Buy a V8 pressure hose for a '66.

I noticed in this pic your running a 298mm "Non-LS" 4L60E, Have you worked out the conversion to run this unit on a LS engine?

Re: 1966 C10 stepper--5.3/4l60e budget build
 

It didn't have power steering before if that's what your talking about the old 6 cyl pump.

What's the conversion?

Re: 1966 C10 stepper--5.3/4l60e budget build
 

That is a lot of yellow, haha. Looks like a nice truck, though, and you are doing some nice work so far.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Does your steering box take "Flare" or "O-ring" hoses?

You will need a crank spacer & redrill your flexplate for the converter bolts.

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Honestly I don't remember for the 2000 Silverado system.

Yes I used a spacer and I didn't have to redrill holes. I was able to rotate about 15 degrees and the next set of holes lined up...

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Yes lots of yellow! Haha thanks

Re: 1966 C10 stepper--5.3/4l60e budget build
 

Haven't updated in awhile. Been super busy with a new job and living out of town. Finally got the truck moved with me and got back to work on it.

Got the harness finished up. Not as pretty as the premade ones but it was a heck of a lot cheaper! Have a radiator on the way as well as getting the pcm sent off for retuning.

Working on figuring out what to do for electric fans and trans cooler at the moment.

Getting close to a start at least. It's pretty dirty but it's progress!!

http://i1031.photobucket.com/albums/...D995A872A0.jpg

http://i1031.photobucket.com/albums/...68688AE1_1.jpg


http://i1031.photobucket.com/albums/...744E9762_1.jpg


http://i1031.photobucket.com/albums/...CBE4349DE0.jpg