WTB PG/3 speed trans yoke
 

Like the title states I am looking for a driveshaft yoke for a 3 speed manual trans with the pg output shaft.

Re: WTB PG/3 speed trans yoke
 

I think I have one. $25 plus shipping.

Re: WTB PG/3 speed trans yoke
 

If you do, let me know what shipping would be to 28555.

Re: WTB PG/3 speed trans yoke
 

What do you mean by Powerglide output shaft? Are there different output shaft/yoke combinations for a 3-spd?

Re: WTB PG/3 speed trans yoke
 

Yes sir there is, the early ones used the power guild out put shaft splines and the later ones used the TH 350 output shaft splines. At least from what I am told.

Re: WTB PG/3 speed trans yoke
 

Do you know the diameter and spline count you need? I have a yoke from my 1970 3-spd trans. Let me know and I can check mine out to see if it's right for what you need.

Thanks,
Mark

Re: WTB PG/3 speed trans yoke
 

The one I need has square cut splines and I want to say it is a 10 to 19 spline count. I will have to go out and look later today.

Re: WTB PG/3 speed trans yoke
 

I could be wrong, but I think a pg , th 350 , and synchronized 3 spd all will use the same yoke. Course spline will be non synchronized.

Re: WTB PG/3 speed trans yoke
 

I can't do you any good. Mine is involute spline. Thank you for the lesson though.

Thanks,
Mark

Re: WTB PG/3 speed trans yoke
 

I have one 32.00 shipped.

Re: WTB PG/3 speed trans yoke
 

Desert rat can you post a pic of it? As long as it's doesn't have any pitting or anything to keep the rear seal from sealing. I will take it. Pm your paypal info

Re: WTB PG/3 speed trans yoke
 

No charge for the old u joint. I will seal without a doubt.

Re: WTB PG/3 speed trans yoke
 

I just noticed in the pics it looks very pitted but it is not.

Re: WTB PG/3 speed trans yoke
 

I will take it sir pm me how you would like to get paid. And thanks for the free u joint haha

Re: WTB PG/3 speed trans yoke
 

PMed !

Re: WTB PG/3 speed trans yoke
 

PM replied to and payment sent, Thank you