The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - NM 305 engine parts (https://67-72chevytrucks.com/vboard/showthread.php?t=673279)

305 engine parts

I was budget rebuilding a 305 and ultimately found the block was cracked and too far gone. I sold the Jimmy it was in and have these good parts left over. Let me know if you're interested in any of it. Prices are OBO plus shipping.

http://i1175.photobucket.com/albums/...pslis3qiax.jpg

http://i1175.photobucket.com/albums/...psc0czy2gg.jpg

http://i1175.photobucket.com/albums/...pszz0apchy.jpg

http://i1175.photobucket.com/albums/...pseb3ooyt3.jpg
http://i1175.photobucket.com/albums/...psqab5isxp.jpg

http://i1175.photobucket.com/albums/...pstulxklux.jpg

http://i1175.photobucket.com/albums/...ps2m75f49n.jpg

http://i1175.photobucket.com/albums/...psro7jlx8k.jpg

http://i1175.photobucket.com/albums/...ps68whjkbb.jpg

http://i1175.photobucket.com/albums/...psstxcrh2q.jpg

Valve covers- 20.00
Air cleaner- 15.00 SOLD
Intake manifold- 50.00
Edelbrock 600 carb- 150.00
Starter- 15.00
Water pump- 15.00
Oil pump- 15.00
Fuel pump- 15.00
Crankshaft pulley- 15.00 SOLD
Balancer- 15.00 SOLD
Front cover-10.00 SOLD
Alternator- 25.00 SOLD
Distributor- 50.00 SOLD
Heads- 200.00 pair
Headers- 85.00 - SOLD
Flywheel- 15.00 SOLD
Oil pan- 20.00 SOLD
Distributor cap & wires- 15.00 SOLD
Kick down cable bracket- 20.00
Alternator bracket- 20.00

Re: 305 engine parts

Stock or aftermarket intake?

Re: 305 engine parts

would happen to have the casting number(s) off of the head(s) ... ?

Re: 305 engine parts

Quote:

Originally Posted by sanford&daughter (Post 7203523)

Stock or aftermarket intake?

Fairly certain stock

Re: 305 engine parts

Quote:

Originally Posted by Lokin4AReason (Post 7203524)

would happen to have the casting number(s) off of the head(s) ... ?

I'll check tomorrow

Re: 305 engine parts

Quote:

Originally Posted by Lokin4AReason (Post 7203524)

would happen to have the casting number(s) off of the head(s) ... ?

Both the same

Re: 305 engine parts

I could use that timing cover. Let me know how much to 92595. Thanks,

Re: 305 engine parts

I'll be back to work (where these parts are) on Tuesday and will get you a shipped price then.

Re: 305 engine parts

Quote:

Originally Posted by beamn7 (Post 7208093)

I could use that timing cover. Let me know how much to 92595. Thanks,

20.00 shipped

Re: 305 engine parts

Bump
I've indicated the items that have sold

Quote:

Originally Posted by UKNOWME (Post 7212954)

20.00 shipped

Deal. Send you a PM
Posted via Mobile Device

Re: 305 engine parts

Power steering pump pulley?

Re: 305 engine parts

Quote:

Originally Posted by rudyyloverboiii (Post 7263965)

Power steering pump pulley?

Forgive my rudeness I missed your post. I'm away from those parts until Monday. I will do my best to remember to check. Please don't hesitate to PM in the event I forget.

Thank you!

Re: 305 engine parts

No power steering pump pulley, sorry.

Re: 305 engine parts

damn i needed that oil pan. too slow.......

Re: 305 engine parts

I still have this stuff if anyone is interested.

Re: 305 engine parts