The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   SBC vacuum lines (https://67-72chevytrucks.com/vboard/showthread.php?t=673733)

letters 06-13-2015 07:09 PM

SBC vacuum lines
 
2 Attachment(s)
It's been a few months since the old engine came out, and I just want to make sure before I break the new one in:

PCV to the front of the carb (truck avenger) and brakes directly to the manifold is what I have right now. Is this set up right?

There's another connector right next to where I have the PCV going in but it's capped off. The diagram I found shows there's a brake vacuum line in the back of the carb, but that doesn't exist. I'm thinking the capped off one is either that connection in a different spot, or it goes to the air cleaner.

Thanks.


All times are GMT -4. The time now is 07:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com