Need help with 67 Chevy van
 

I know this is not the right place, but can anyone here direct me to where I can get help with a 67 Chevy van? I just bought this G20 (Heavy Half) for a father son project. It has a G10 5 lug rear axle but the original G20 6 lug drum brake straight axle. I'd like to convert it to 5 lug and disc brakes.
Thanks
https://scontent-ord1-1.xx.fbcdn.net...a9&oe=56215771

Re: Need help with 67 Chevy van
 

I dont have any answers for you but Im in to see this ,love those vans .

Re: Need help with 67 Chevy van
 

It has a solid axle front end? I saw a 66 p van that had independent front suspension. I wonder if that would fit after removing that solid axle front. Cool lookin van. You know we're gonna need more pics of that shaggin waggin

Re: Need help with 67 Chevy van
 

thanks, it has a 283 three speed. We are hoping to get it road worthy and do the Hot Rod Power tour with it next year. It runs but when they swapped the rear axle, they didn't hook up the brake lines. It also needs a carb rebuild and lots of other things but it should be fun!
https://scontent-ord1-1.xx.fbcdn.net...33&oe=561695CE
https://scontent-ord1-1.xx.fbcdn.net...5e&oe=5632AC30
https://scontent-ord1-1.xx.fbcdn.net...ad&oe=5635457A

Re: Need help with 67 Chevy van
 

Cool van. The interior pic reminds me of Dumb and Dumber.

Re: Need help with 67 Chevy van
 

that's what my wife said too! lol

Re: Need help with 67 Chevy van
 

I'm afraid I can't offer any help with your question but very cool van!!!

Re: Need help with 67 Chevy van
 

Don't know much about these either but always thought they were cool. I didn't know they came with v 8's always thought they were all 6 cylinders. Or was it? Whenever I see one of those it always makes me think of the mystery machine in Scooby Doo. I knew a guy that had one of those about 30 years ago and he put a car type 4 speed in it. It was rigged up to shift 4 speeds on the column but then he had a lever rigged up for reverse that was on the floor under the front seat. Not sure how that worked out for him in the long run but always thought it was funny.

Re: Need help with 67 Chevy van
 

Cool Van!

Re: Need help with 67 Chevy van
 

Don't know much about it mechanically but do know it's cool

Re: Need help with 67 Chevy van
 

I also did not know they came from the factory with a V8 but have learned a lot about them already. 67 was the first year for the V8. It's a factory 283 three speed heavy half ton or G20. The G10 came with a straight 6. Later in 69 they offered the 307. the 63 - 66 only had a I6. They even offered an automatic trans in 69/70! but all the others were 3 speed manual. A 4 speed shifter would be a challenge

Re: Need help with 67 Chevy van
 

it has an HEI distributor but other than that it's pretty much stock
https://scontent-ord1-1.xx.fbcdn.net...b6&oe=5615DBF6
https://scontent-ord1-1.xx.fbcdn.net...29&oe=5614ECA9

Re: Need help with 67 Chevy van
 

Vintagevans.com Also just Google 1967 Chevy van forums :smoke:

Re: Need help with 67 Chevy van
 

If you want to get technical, it's not the right place, but heck, it's certainly welcome! That's a cool van and what looks to be a fun project!

Re: Need help with 67 Chevy van
 

I started my post by saying that I know it isn't the right place, but since there isn't a van section I was hoping the expertise of members here could guide me to the right place. Looks like I have a few good suggestions. I have "registered" to the vintage van forum, waiting approval.
If the moderators wish to remove the thread I will understand.

Re: Need help with 67 Chevy van
 

when i said shaggin waggin i didnt know the inside was so Shaggy! ;) id like to see where this goes

Re: Need help with 67 Chevy van
 

the shaggy is being removed! also all the paneling and a few interesting artifacts have been removed!
https://scontent-ord1-1.xx.fbcdn.net...bd&oe=55EA263E
https://scontent-ord1-1.xx.fbcdn.net...27&oe=56255992
https://scontent-ord1-1.xx.fbcdn.net...3c&oe=5631FECD

test fitting some seats...
https://scontent-ord1-1.xx.fbcdn.net...94&oe=561E1837
https://scontent-ord1-1.xx.fbcdn.net...c1&oe=5627AF75

Re: Need help with 67 Chevy van
 

and a picture of the 72 just to keep the thread legal...
https://scontent-ord1-1.xx.fbcdn.net...c8&oe=55E7D456

Re: Need help with 67 Chevy van
 

I wonder if the straight axle would be the same as a 1959 pickup? If so you could get a conversion from CPP possibly. I doubt they were changed much through the years .

Re: Need help with 67 Chevy van
 

Can't help, but that is a cool van!

Re: Need help with 67 Chevy van
 

Check out http://www.vintage-vans.com/

My brother is a van dude

Re: Need help with 67 Chevy van
 

That's at least a 100% improvement, just taking the carpet off the dash

Re: Need help with 67 Chevy van
 

I know that they have a few van forum(s) that you can like join ...

besides that, cool looking van ( don't see many of them around =0/ )

Re: Need help with 67 Chevy van
 

That van is just plain cool !

Re: Need help with 67 Chevy van
 

Is it a "Uni-body" or does it have a frame? It might be easier to re-drill the rear axles to match the front. Lot's of 6 lug wheels to find these days. ????
Cool van. I like it a lot.