The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What color wood?? (https://67-72chevytrucks.com/vboard/showthread.php?t=675329)

LDO 06-30-2015 07:08 PM

What color wood??
 
Ok,
asking for some creative advice. My wife got me a pine wood kit from MarK that I haven't touched because I can't figure out what color would work on my truck.

66 short fleet. Color on the outside is 'hot rod black' with a red 63 grille and red on the tailgate.

Inside is mostly gray, seat is black with a little red and steering wheel is black & red two tone. Door panels match seat material.

I was thinking red strips and black wood or red wood and black strips? I would like to see the woodgrain on the wood.

Hope the pics help.

http://i41.photobucket.com/albums/e2...ETTY/betty.jpg
http://i41.photobucket.com/albums/e2...Y/DSCN4317.jpg
http://i41.photobucket.com/albums/e2...7-28-12063.jpg
http://i41.photobucket.com/albums/e2...7-28-12062.jpg
http://i41.photobucket.com/albums/e2...Y/DSCN4191.jpg

Chevy Fleetside 06-30-2015 07:35 PM

Re: What color wood??
 
natural. The mellow yellow of the pine looks good with black. If you use helmans clear it will darken it. Get some sample pieces at a lumber store and try different colors and see what you might like. I am a carpenter and like the look of natural wood

PGSigns 06-30-2015 07:45 PM

Re: What color wood??
 
The way yote1234 did his would also look good with your truck.
Jimmy

oem4me 07-01-2015 01:31 AM

Re: What color wood??
 
Gonna have to use your imagination with this one: Black strips, black wood with red grain. Not easily achieved on a weekend, but do-able. The wood is painted black, sanded lightly, and re-painted black. Then red grain filler is applied, dried and fine sanded off. Finally, clear over everything to desired level of gloss.
Can you see it? I'll see if I can find some images of similar effects. Will post if I
find something.

oem4me 07-01-2015 01:40 AM

Re: What color wood??
 
2 Attachment(s)
That was easy. Here ya go.

oem4me 07-01-2015 02:03 AM

Re: What color wood??
 
Re-read your orig post. Sorry, this look is not so easy or effective on pine grain. Easier on ash or oak. Kinda cool though, ya think?

62 Barnfind 07-01-2015 11:15 AM

Re: What color wood??
 
Quote:

Originally Posted by oem4me (Post 7227222)
That was easy. Here ya go.

That would look sick in that truck!

1963c-10 07-01-2015 11:33 AM

Re: What color wood??
 
1 Attachment(s)
Quote:

Originally Posted by 62 Barnfind (Post 7227510)
That would look sick in that truck!

I agree.....very cool. I was looking at something similar myself....this is considered a blue stain. I want to do something like this on my stepside. Just did the wood in 2009, but I'd like to change the look of the wood.

LDO 07-01-2015 12:49 PM

Re: What color wood??
 
Quote:

Originally Posted by oem4me (Post 7227222)
That was easy. Here ya go.

wow,
well, i already have a pine kit so i may try it and see. I could also buy some pine planks at Lowes and give it a shot on those first! :lol:

Turtleman 07-01-2015 12:59 PM

Re: What color wood??
 
Use AkzoNobel's glaze coat and tint your own stain. I've been doing it since 1967,, you can make it anything you want,, why not black with red pins on each side that align with the rails? You can adjust to any opacity you like that way.

LDO 07-01-2015 01:02 PM

Re: What color wood??
 
Quote:

Originally Posted by Turtleman (Post 7227640)
Use AkzoNobel's glaze coat and tint your own stain. I've been doing it since 1967,, you can make it anything you want,, why not black with red pins on each side that align with the rails? You can adjust to any opacity you like that way.

Turtleman, what do you mean by red pins on each side?

Turtleman 07-01-2015 06:47 PM

Re: What color wood??
 
Pin Stripes ,, a single line of red stain to off set the black. Black board,, thin red line down each side of the board ( one left one right). Then the steel floor bracket..... repeat.. :)

There's always Scarlet & Gold...

LDO 07-01-2015 06:51 PM

Re: What color wood??
 
Quote:

Originally Posted by Turtleman (Post 7227981)
Pin Stripes ,, a single line of red stain to off set the black. Black board,, thin red line down each side of the board ( one left one right). Then the steel floor bracket..... repeat.. :)

There's always Scarlet & Gold...

oh, ok, gotcha. No scarlet & gold on this one though LOL...


All times are GMT -4. The time now is 07:20 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com