Frame horn cuts
 

Nice pair of frame horn cuts available. These were cut at the engine cross member from a 1970 C20 but will fit C10's and other years. Will come as shown in photo.

Asking $50.00 each or $90.00 for this pair plus shipping.

We have many other frame cuts and cross members as well as spring hangers for 67-72 pick ups available. Please ask for what you need and I should be able to help.

Thank you for looking,
Thomas

Re: Frame horn cuts
 

ttt

Re: Frame horn cuts
 

ttt

Re: Frame horn cuts
 

Do you have a pair of these for a 1961 GMC half ton?
Thanks, Rolland

Re: Frame horn cuts
 

Sorry, the earliest truck we have is a 64 and I am sure the horns are different. I could be wrong but believe 63 and up frames were different.

Thank you for the interest,
Thomas

Re: Frame horn cuts
 

Do you have these for a 72 4wd? Just checking for now. I may need some later.

Re: Frame horn cuts
 

I do have them available. I have a passenger side ready to ship but I would have to cut one from a truck for the drivers side.

Do you want these bare or with spring hangers and bump stops attached?

Let me know exactly what you need and how far back on the frame you need and we can get a price together.

Thank you for the interest,
Thomas

Re: Frame horn cuts
 

Ok great. I've got to get a pipe bumper out of the way first that was welded on by a previous owner, so I'll keep you posted. Would these fall in the same price range as what you have posted here?

Re: Frame horn cuts
 

The price will depend on if you need the spring hanger/core support mounts and the bump stop in place or if you want the rails bare and how far back you need them. The pass side that I have was cut just after the upper shock mount hole but I can trim it if you don't need all of that to save on shipping.

Let me know,

Thank you,
Thomas

Re: Frame horn cuts
 

Any chance you have the rear 2' (both sides) of a c20 (non leaf spring)??

Re: Frame horn cuts
 

At this time I do not. It is not a common request. When I cut the frames, I save the cross members and usually burn out the rivet holes. If it was for a leaf spring truck, no problem. The coil spring frames have all been processed.

If something comes up in the near future, I will keep you in mind.

Thank you for the interest,
Thomas

Re: Frame horn cuts
 

Thank you, desperately needed as project is at stand still :(