2 inch drop spindles
 

I almost always see 2.5 or 3 inch drop spindles but the other day i saw Brothers sells a 2 inch spindle. I run stock 15x8 rallys and was wondering if the using the 2 inch spindle will my rims clear my control arms without clearancing them?

Re: 2 inch drop spindles
 

This may be apples and oranges as they say, but: I'm running those same rims with 275/60 TA radials, 2 1/2 drop spindles and have no clearance issues. Good luck with your project.

Re: 2 inch drop spindles
 

Sorry, I didn't say that I'm running that on a 77' c10, don't know if there is that much of a difference between an 86' front end.

Re: 2 inch drop spindles
 

Interesting, the rim clears the lower arm even at full turn? What brand spindle?

Re: 2 inch drop spindles
 

I've been running these for awhile (2000) so hope that this is even close to being useful information...I bought them from Chassis Tech, and I see that they are at least still in business. Bell Tech was the big name back then, but they wanted a lot more for their products.

Re: 2 inch drop spindles
 

Wow, first positive comment I've heard about Chassis Tech