The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   motor and tranny mounts (https://67-72chevytrucks.com/vboard/showthread.php?t=676711)

flood1964 07-16-2015 09:35 AM

motor and tranny mounts
 
I'm looking for motor and tranny mounts for a 5.7 vortec engine and 700r4 swap on my 1965 c10 short bed fleetside. I was told the original perches will work. I would like to use something that just bolts up (no drilling).

Mathew21 07-16-2015 06:47 PM

Re: motor and tranny mounts
 
I just installed a 5.3L Vortec and 4l60e in my 66'. I used the original perches and dirty dingo sliders. On my trans mount my buddy fabbed up a new mount for me.

big block 66 07-16-2015 07:34 PM

Re: motor and tranny mounts
 
www.classicparts.com have what u need. part # 79-066 for the perches and part #79-507 for the trans mount

flood1964 07-16-2015 07:51 PM

Re: motor and tranny mounts
 
Thanks guys, I appreciate the help.

flood1964 07-16-2015 09:07 PM

Re: motor and tranny mounts
 
A big block 66, I looked up those parts And the trans mount is labeled as a 67-71. My truck is a 65.

flood1964 07-16-2015 09:20 PM

Re: motor and tranny mounts
 
Disregard it came up 63-72 this time. Thanks again

flood1964 07-30-2015 11:13 PM

Re: motor and tranny mounts
 
Do i have to remove the emergency brake system to install this transmission cross-member 79-507?


All times are GMT -4. The time now is 02:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com