K5 Factory Jack
 

Can someone help out and post some pictures of the proper jack and accessories for 68 - 72 Blazer, and where they are stowed away? Thanks

Re: K5 Factory Jack
 

It is the same jack as the pickups. Go to the top of the page in the google box and click 67-72 Chevy trucks.com Put in Jack assy . If you want one that is similar . Ford and Chevy late model trucks look almost identical otherwise the forum has quite a few for sale.

Re: K5 Factory Jack
 

Here is the jack set up with rear seat equipment. If no rear seat, the spare tire and jack would move forward behind the driver's seat, but basically in the same orientation. The lug wrench and jack handle would be behind the driver's seat as pictured, though the double hook at the end of the spring should engage the jack handle. I have been working on a reproduction of the Jacking Instructions decal. You can see the arrangement in the illustration.

Re: K5 Factory Jack
 

Thanks Iron Canine, put me on your list for the new decal. Jack

Re: K5 Factory Jack
 

Great info. Put me on the list for a decal also, Thanks Tom

Re: K5 Factory Jack
 

Howdy, do you have any of these decals?
Thanks,
Matthew

Re: K5 Factory Jack
 

Does anyone have a proper working jack and lug wrench available for a 72 Blazer?

Re: K5 Factory Jack
 

I believe its the same as a truck. Look on the truck classified side. You may get reprimanded for a wtb ad when you're not blue.......

Re: K5 Factory Jack
 

I will look there, thank you for the tip and advice which I will heed.

Re: K5 Factory Jack
 

anyone have a jack or the jack holder or tools for sale for a 72 blazer thanks

Re: K5 Factory Jack
 

Old thread, but good info nonetheless

On a Posi-traction equipped Blazer, at least on a 1970, the jacking instruction decal is positioned low on the left wheel tub, and the large white limited slip diff warning decal is placed where the jacking instruction decal normally is.

https://www.motorcityvettes.com/imag...022d437b00.jpg

Unrestored 1970 with rear posi:

https://bringatrailer.com/wp-content...it=2048%2C1365

Mine restored with rear posi:

https://67-72chevytrucks.com/vboard/...ictureid=27292

1970 optioned with posi. Posi decal missing or never applied, but low position for jack decal:

https://photos.classiccars.com/cc-te...blazer-std.jpg

Here is a 1969 not optioned with rear posi:

https://bringatrailer.com/wp-content...it=2048%2C1361

Another 1969 not optioned with posi:

https://bringatrailer.com/wp-content...it=2048%2C1536

1971 not optioned with posi:

https://bringatrailer.com/wp-content...it=2048%2C1536

1972 not optioned with posi:

https://bringatrailer.com/wp-content...it=2048%2C1363

1972 not optioned with posi:

https://bringatrailer.com/wp-content...it=2048%2C1536

1972 not optioned with posi:

https://photos.classiccars.com/cc-te...azer-thumb.jpg

Re: K5 Factory Jack
 

More posi decals here: https://67-72chevytrucks.com/vboard/...ght=posi+decal

Re: K5 Factory Jack
 

It appears that either orientation is technically correct. I remember mine was as the green 1970 was with the posi decal above the jacking decal.