6 bangor, 3 speed column to 350 turbo 350 small block
 

Hello, need info on what mounts are required to do a small block install on my 69 Blazer. Has three on the tree and a six now. Also does the 350 trans bolt right up? Any help would be greatly appreciated!

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

Should not be bad, I am sure someone will chime in if I am not correct but the engine crossmember and towers for a sbc bolt in should be able to purchase them on the for sale forum fairly easy. I am not sure what the tranny transfer for a 3 sp. looks like but should be another bolt on and easy to purchase on the forum. The column and shifter linkage again is all bolt on stuff so like I said should all be fairly easy. I may have some of the stuff you need can look if interested.

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

Thanks for the info! I have the column. Will need the shift linkage if you have it. Thanks!
Posted via Mobile Device

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

Sorry I totally forgot about this do you still need the stuff?

[QUOTE=1rippen6;7293910]Sorry I totally forgot about this do you still need the stuff?[/QUOTEI
Hello, I do need everything except the column.
Posted via Mobile Device

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

I thought the 1970 Blazer 2WD 6 cylinder with 3 on the tree was rare. How rare is a 1969? Where do they keep these?

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

That is weird I didn't get a notice that you posted I will look tomorrow and see what all I have.

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

That is a really rare combo. The engine mounts can be had I believe from lmc or brothers. Or someone parting out a truck. Easiest way would be to buy a cheap parts truck and get everything out it that you need. How good is the engine and trans that are in it? Also,you got pics?

Re: 6 bangor, 3 speed column to 350 turbo 350 small block
 

Sorry it took so long maybe I missed it but is your truck 2wd? The stuff I have is from a 4wd should be the same but I am not 100% sure. The pivot pin has some wear but I will and blast and fix that before shipping. 45 plus shipping send your zip if interested and I will get you a quote.