The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Transmission AN fittings (https://67-72chevytrucks.com/vboard/showthread.php?t=678332)

Sean1985

08-02-2015 04:27 PM

Transmission AN fittings

1 Attachment(s)

For all you guys that want to run AN fitting for your trans and hook up to your cooler in your radiator. After a lot of searching I found the correct fitting from Russell.

Tillik

08-02-2015 05:12 PM

Re: Transmission AN fittings

Nice work

Longhornss

08-02-2015 05:15 PM

Re: Transmission AN fittings

Quote:

Originally Posted by Sean1985 (Post 7261417)

For all you guys that want to run AN fitting for your trans and hook up to your cooler in your radiator. After a lot of searching I found the correct fitting from Russell.

There are fitting out there that you can use and remove the original inverted flair fitting from the trans and replace it with a -6. 1/4npt fittings "work" but there are straight cut 1/4 fitting that seal with a copper crush washer as well....
Can't seem to find the part number from summit at the moment.

jeh	08-02-2015 10:43 PM

Re: Transmission AN fittings

I've found the correct ones for the transmission, but not the radiator.

Sean1985

08-02-2015 10:45 PM

Re: Transmission AN fittings

Quote:

Originally Posted by jeh (Post 7261884)

I've found the correct ones for the transmission, but not the radiator.

That's the fitting for the radiator. Works perfect.

Steeveedee

08-02-2015 11:35 PM

Re: Transmission AN fittings

I'm curious why someone would go to a different fitting, given that the inverted flare fitting has worked so well for so many years?

jeh	08-03-2015 08:02 AM

Re: Transmission AN fittings

Quote:

Originally Posted by Sean1985 (Post 7261889)

That's the fitting for the radiator. Works perfect.

Ok, thanks for the part #

biketopia

08-03-2015 08:19 AM

Re: Transmission AN fittings

Quote:

Originally Posted by Steeveedee (Post 7261934)

I'm curious why someone would go to a different fitting, given that the inverted flare fitting has worked so well for so many years?

So you can use an fittings, maybe he wants to run braided hose and not hard steel lines.

All times are GMT -4. The time now is 08:37 PM.